GB/T 26246-2010General specification of case for microcomputer (English PDF)
微型计算机用机箱通用规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26246-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
May 1, 2011
Scope
GB/T 26246-2010 is the English-translated version of 微型计算机用机箱通用规范.
GB/T 26246-2010 is the Chinese standard "General specification of case for microcomputer". Its scope clause reads: This standard specifies the desktop microcomputer with chassis requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to desktop microcomputer with a chassis (commonly known as computer chassis) design, manufacture and sales. Its clauses include requirements.
Found what you need?
Document preview — GB/T 26246-2010
National Standard of the People's Republic of China
- ICS
- 35.160
- Classification
- L 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Requirements
- 4 Test Method
- 5 Inspection Rules
- 6 signs, packaging, transportation and storage
1 Scope
This standard specifies the desktop microcomputer with chassis requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to desktop microcomputer with a chassis (commonly known as computer chassis) design, manufacture and sales.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-
1.2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-
2.2007, IDT)
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB/T 4857.5 packaging transport package drop test method (GB/T 4857.5-1992, eqv ISO 2248. 1985)
GB 4943-2001 Safety of information technology equipment (eqv IEC 60950.1999)
GB/T 6739 Determination of paints and varnishes film hardness pencil method (GB/T 6739-2006, ISO 15184.1998, IDT)
GB/T 6882 Determination of sound pressure of sound power levels of noise sources anechoic and semi-anechoic chamber Precision method (GB/T 6882-2008,
ISO 3745.2003, IDT)
GB radio disturbance characteristics - Limits and methods of measurement 9254 Information Technology Equipment (GB 9254-2008, CISPR22.2006, IDT)
GB/T 9286 Paints and varnishes cut test (GB/T 9286-1998, eqv ISO 2409.1992)
GB/T 10125 artificial atmosphere corrosion test salt spray test (GB/T 10125-1997, eqv ISO 9227.1990)
3 Requirements
3.1 Materials
3.1.1
Products used in packaging materials and cushioning material should be used in preference materials comply with environmental requirements.
3.1.2
metal surface coating shall meet the following requirements.
a) not less than the hardness of 2H;
b) After the adhesion test, 95% of the test should be non-shedding coat small squares.
3.1.3
The coating should be in the salt spray test 4h, corrosion area can not exceed 10% of the total surface area of the parts.
3.2 Appearance
3.2.1
The surface of the product should not have obvious cracks, deformation, scratches, fading, dirt and lack of glue and other phenomena.
3.2.2
Coating thickness should be uniform, not blistering, cracking, and wear off.
3.2.3
There should be no rust metal parts and other serious mechanical damage.
3.2.4
the text on the product, symbols, signs should be correct, clear, correct, and should comply with the relevant national standards or industry standards.
3.2.5
The appearance of the surface part of the same color number should be no color.
GB/T 36092-2018 | GB/T 34973-2017 | GB/T 9813.3-2017 | GB/T 47518-2026 | GB/T 47514-2026 | GB/T 47502-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26246-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26246-2010
$145.00