Valid

GB/T 26230-2010Information technology -- Telecommunications and information exchange between systems -- MAC-PHY Interface for wireless high rate ultra-wideband (English PDF)

信息技术 系统间远程通信和信息交换 无线高速率超宽带媒体访问控制和物理层接口规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (42 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26230-2010 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

January 14, 2011

Implementation date

May 1, 2011

Scope

GB/T 26230-2010 is the English-translated version of 信息技术 系统间远程通信和信息交换 无线高速率超宽带媒体访问控制和物理层接口规范.

GB/T 26230-2010 — This standard specifies the interface PHY layer and MAC layer GB/T 26229 stipulated in between. This standard applies to fixed, portable and mobile devices, which mainly operate in the limited personal space (10m or so), to mention for transfer rate up to 480Mbit/s of.

Found what you need?

Document preview — GB/T 26230-2010

National Standard of the People's Republic of China

ICS
35.100
Classification
L 79

Issued by: Standardization Administration of China

Contents

  • Preface
  • 1 Scope
  • Consistency 1
  • 3 Normative references
  • 4 Terms and definitions
  • 5 Symbol Conventions
  • Acronyms 6
  • 7 Overview
  • 8 Interface Signal Description
  • 8.1 Interface signal definition
  • 8.2 PHY operating state
  • 9 Register
  • 9.1 Sorting and interpretation
  • 9.2 Register address space
  • 9.3 Static parameters defined
  • 9.4 Static coding parameters
  • 9.5 Dynamic register definitions
  • 9.6 Registers Table
  • 14 9.7 Register Set Access Timing
  • 9.8 Subcarrier recess (Tone-nuling)
  • 10 Structure
  • 11 19 Theory of Operation Interface
  • 11.1 Overview
  • 11.2 Timing
  • Ranging Support 11.3
  • 11.4 Transceiver delay is defined
  • 11.5 Transceiver switching time
  • 11.6 Preamble control
  • 26 11.7 send operation

Foreword

This revised standard adopts ISO/IEC 26908:2007-09 "Information technology - Telecommunications and information exchange between ISO/IEC 26907 the MAC-PHY interfaces. " the Standard and ISO/IEC 26908:2007 technical differences exist compared to the terms of these differences has been involved through its outer margin empty Singlet white vertical position (|) were marked.

This standard is based on GB/T 1.1-2000 and GB/T 20000.2-2001 drafted.

The Standard Appendix A, Appendix B is an informative annex.

This standard by the National Information Technology Standardization Technical Committee and centralized.

This standard drafting units. China Electronics Standardization Institute, HiSilicon Ltd., Southeast University, Beijing Posts and Telecommunications large Science, IWNCOMM Wireless Network Communication Co., Fudan University, Hong Kong Applied Science and Technology Institute.

1 Scope

This standard specifies the interface PHY layer and MAC layer GB/T 26229 stipulated in between.

This standard applies to fixed, portable and mobile devices, which mainly operate in the limited personal space (10m or so), to mention for transfer rate up to 480Mbit/s of.

2 Conformance

The PHY and MAC implementations GB/T 26229 by implementing the provisions of this standard interface to maintain this standard with a Consistent.

3 Normative References

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent all amendments (not including errata content) or revisions do not apply to this standard, however, encourage an agreement in accordance with this standard Whether the parties can study the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 26229-2010 Information technology - Telecommunications and information exchange between wireless high speed ultra-wideband MAC and physical layer specifications (ISO/IEC 26907:2007, MOD)

4 Terms and Definitions

Terms and definitions GB/T 26229-2010 defined apply to this standard.

5 Symbol Conventions

All floating-point values \u200b\u200bonly take four decimal digits.

Exclamation point indicator signal before the signal is active low.

6 Acronyms

BM burst mode (BurstMode) CCA idle channel assessment (ClearChannelAssessment) CRC Cyclic Redundancy Code (CyclicRedundancyCode) FCS Frame Check Sequence (FrameCheckSequence) FFI fixed frequency interleaving (Fixed-FrequencyInterleaving) FRC free running clock (FreeRunningClock) HCS header check sequence (HeaderCheckSequence) LQI Link Quality Indicator (LinkQualityIndicator)

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 26230-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
42 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26230-2010

$675.00