GB/T 26060-2010Titanium and titanium alloy ingots (English PDF)
钛及钛合金铸锭
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26060-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26060-2010 is the English-translated version of 钛及钛合金铸锭.
GB/T 26060-2010 is the Chinese standard "Titanium and titanium alloy ingots". Its scope clause reads: This standard specifies the requirements for titanium and titanium alloy ingots, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificate Contracts (or orders) content.
This standard applies to vacuum consumable arc furnace (VAR), titanium electron beam cooling bed furnace (EBCHM) and titanium alloy round ingot production and moment Flat-shaped ingot. Its clauses include requirements.
Found what you need?
Document preview — GB/T 26060-2010
National Standard of the People's Republic of China
- ICS
- 77.120
- Classification
- H 64
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 ingot production and melting times
- 3.2 Chemical composition
- 3.3 Dimensions and tolerances
1 Scope
This standard specifies the requirements for titanium and titanium alloy ingots, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificate
Contracts (or orders) content.
This standard applies to vacuum consumable arc furnace (VAR), titanium electron beam cooling bed furnace (EBCHM) and titanium alloy round ingot production and moment
Flat-shaped ingot.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3620.1 titanium and titanium alloys and chemical composition
GB/T 3620.2 titanium and titanium alloy products of chemical composition and permissible variations
GB/T 4698 (all parts) Sponge titanium, titanium and titanium alloys
GB/T 23605 Titanium beta transformation temperature measurement method
3 Requirements
3.1 ingot production and melting times
Ingot melting and production times are shown in Table 1.
Table 1
Grade production melting times
GB/T 3620.1 in all grades
VAR, EBCHM VAR least twice
EBCHM once
3.2 Chemical composition
3.2.1 Designation and chemical composition
Titanium and titanium alloy ingots of grades and chemical composition shall comply with GB/T 3620.1 of.
3.2.2 chemical composition and permissible variations
When the demand side from the ingot retest samples for chemical composition analysis, the component tolerances shall comply with the provisions of GB/T 3620.2 of.
3.3 Dimensions and tolerances
3.3.1
ingot diameter (thickness or width) tolerances shall comply with the provisions of Table 2.
Table 2 millimeters
Diameter (thickness or width) <=350 > 350 ~ 550 > 550 ~ 720 > 720 ~ 820 > 820 ~ 1040 > 1040
Tolerance
-30
-40
-60
-70
-80
-100 3.3.2 the same maximum diameter ingots (thickness or width) and the minimum diameter (thickness or width) of the difference should be not less than its diameter (thickness or width
Degree) allows deviation of a half.
GB/T 26008-2020 | GB/T 32185-2015 | GB/T 26058-2010 | GB/T 26063-2023 | GB/T 26057-2010 | GB/T 26056-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26060-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26060-2010
$145.00