Valid

GB/T 25834-2010Corrosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospheres (English PDF)

金属和合金的腐蚀 钢铁户外大气加速腐蚀试验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25834-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 23, 2010

Implementation date

September 1, 2011

Scope

GB/T 25834-2010 is the English-translated version of 金属和合金的腐蚀 钢铁户外大气加速腐蚀试验.

GB/T 25834-2010 is the Chinese standard "Corrosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospheres". Its scope clause reads: This standard specifies the general requirements for steel atmosphere accelerated corrosion test.

This test should be relatively dry climate season or region Atmospheric corrosion under outdoor exposure test station (field) conditions.

The standard test objectives are. --- Faster data obtained steel corrosion under atmospheric environment; --- Evaluated under the given test conditions and exposure to natural atmospheric ambient conditions correlation between test results. Its clauses include test device.

Found what you need?

Document preview — GB/T 25834-2010

National Standard of the People's Republic of China

ICS
77.060
Classification
H 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the general requirements for steel atmosphere accelerated corrosion test. This test should be relatively dry climate season or region

Atmospheric corrosion under outdoor exposure test station (field) conditions.

The standard test objectives are.

--- Faster data obtained steel corrosion under atmospheric environment;

--- Evaluated under the given test conditions and exposure to natural atmospheric ambient conditions correlation between test results.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

General rules GB/T 11377 metals and other inorganic coatings under storage conditions Corrosion Test

General requirements GB/T 14165-2008 metals and alloys - Atmospheric corrosion testing for field tests

Removal of corrosion products from corrosion specimens GB/T 16545 of metals and alloys

Measurement GB/T 19292.3 atmospheric corrosion of metals and alloys corrosive pollutants

JB T 6074 etching sample preparation/cleaning and assessment

3 test device

Acceleration test device by the test stand and atomization system. Wherein the system includes a spray atomization device (water part), water purifiers and timing

Spraying automatic control system. Figure 1 is a schematic diagram of the test stand and the atomizing device.

1 --- test stand;

2 --- head;

3 --- pumps;

4 --- sink;

5 --- pump inlet;

6 --- sink outlet;

7 --- pump outlet;

8 --- pump outlet pipe (water pipe);

. 9 --- valve (back valve);

10 --- tank inlet;

. 11 --- water purification;

12 --- purifier outlet;

13 --- sink inlet (entrance test medium);

14 --- sink overflow;

15 --- sink outfall;

16 --- purifier inlet;

17 --- purifier outlet (outfall);

18 --- sample.

Figure 1 Schematic diagram of accelerated test

GB/T 22639-2022 | GB/T 19292.1-2018 | GB/T 19292.4-2018 | GB/T 17897-2026 | GB/T 14165-2026 | GB/T 10127-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 25834-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 25834-2010

$145.00