GB/T 25725-2010Special purpose vehicle for live working tools (English PDF)
带电作业工具专用车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25725-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
May 1, 2011
Scope
GB/T 25725-2010 is the English-translated version of 带电作业工具专用车.
GB/T 25725-2010 is the Chinese standard "Special purpose vehicle for live working tools". Its scope clause reads: This standard specifies the live working tools special vehicles - General requirements, test methods, inspection rules, and transportation, and storage.
This standard applies to transmission lines, substations and distribution lines live working live working tools used for cars. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 25725-2010
National Standard of the People's Republic of China
- ICS
- 29.240.20
- Classification
- K 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Car Power vehiclepowersupply
- 3.3 Power conversion devices
- 3.4 Tool storage compartment toolstorage
- 4.1 Classification
- 4.2 Transmission Line (I type) live working tools for cars
1 Scope
This standard specifies the live working tools special vehicles - General requirements, test methods, inspection rules, and transportation, and storage.
This standard applies to transmission lines, substations and distribution lines live working live working tools used for cars.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2900.55 Electrotechnical Terminology - Live Working (GB/T 2900.55-2002, eqv IEC 60050-651.1999)
GB 7258 Safety requirements for operation of motor vehicles
GB/T 14286 live working tools and equipment term (GB/T 14286-2008, IEC 60743.2001, MOD)
GB/T 18037 Live working tools Technical requirements and design guide
DL/T 974 live working tools warehouse
3 Terms and Definitions
GB/T 2900.55 and GB/T 14286 and established the following terms and definitions apply to this standard.
3.1 Car Power vehiclepowersupply
Independent vehicle powered devices.
3.2
When transmission lines, substations and distribution lines live working, for transport, storage and storage of live working tools of special vehicles.
3.3 Power conversion devices
Vehicle power and electricity switching devices with each other.
3.4 Tool storage compartment toolstorage
Tool storage pods, with temperature and humidity control features to meet insulated tools, insulated protective equipment storage temperature and moisture requirements.
Category 4
4.1 Classification
Live working tools and special purpose vehicles used according to the characteristics of the range, divided into three types.
I type --- transmission lines (including substations) with live working tools dedicated vehicle;
Type II --- distribution lines live working tools with special purpose vehicles;
III type --- live working tools dedicated hybrid car.
4.2 Transmission Line (I type) live working tools for cars
Suitable for storing transmission lines (including substations) live working tools used in insulation, metal tools and personal protective equipment. To follow
According to the type, size and number of the stored live working tools and tool storage space to adjust cabin temperature range.
GB/T 37404-2019 | GB/T 2694-2018 | GB/T 31487.3-2015 | GB/T 13398-2026 | GB/T 18037-2025 | GB/T 31235-2024 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 25725-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25725-2010
$165.00