GB/T 25661.2-2010Plano-machining centres with traveling overhead cross rail - Part 2: Specifications (English PDF)
高架横梁移动龙门加工中心 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25661.2-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
July 1, 2011
Scope
GB/T 25661.2-2010 is the English-translated version of 高架横梁移动龙门加工中心 第2部分：技术条件.
GB/T 25661.2-2010 is the Chinese standard "Plano-machining centres with traveling overhead cross rail - Part 2: Specifications". Its scope clause reads: This section GB/T 25661 specifies the overhead beam mobile gantry machining center design, manufacture and inspection requirements.
This section applies to the work surface width 1000mm ~ 4000mm general purpose overhead beam mobile gantry machining centers and CNC Overhead beams mobile gantry milling machine (hereinafter referred to as the "Machine"). Its clauses include general requirements; accessories and tools.
Found what you need?
Document preview — GB/T 25661.2-2010
National Standard of the People's Republic of China
- ICS
- 25.080.20
- Classification
- J 54
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 General requirements
- 4 accessories and tools
1 Scope
This section GB/T 25661 specifies the overhead beam mobile gantry machining center design, manufacture and inspection requirements.
This section applies to the work surface width 1000mm ~ 4000mm general purpose overhead beam mobile gantry machining centers and CNC Overhead beams mobile gantry milling machine (hereinafter referred to as the "Machine").
2 Normative references
The following documents contain provisions which, through reference GB/T 25661 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005,
IDT)
GB/T 6576-2002 machine lubrication system (ISO 5170. 1977, EQV)
GB/T 7932-2003 Pneumatic system General technical conditions (ISO 4414.1998, IDT)
GB/T 9061-2006 General technical conditions for metal cutting machine tools
GB 15760 metal cutting machine tool safety general technology condition
GB/T 16769-2008 Metal-cutting machine noise level measurements
GB/T 23570-2009 Metal Cutting Machine welded General technical requirements
GB/T 23572-2009 Metal Cutting Machine Hydraulic System General technical conditions
GB/T 25373-2010 Metal Cutting Machine Assembly General technical conditions
GB/T 25374-2010 Metal Cutting Machine cleanliness measurement method
GB/T 25376-2010 machining metal cutting machine tools general technical conditions
GB/T 25661.1-2010 overhead beam moving gantry machining centers - Part 1. Testing of the accuracy
3 General requirements
When the machine acceptance in this section, shall at the same time GB/T 9061, GB/T 25376, GB/T 25373 and other standards in this section without a specific
The rest of the projects relating to the acceptance inspection.
4 accessories and tools
4.1
In order to ensure the basic performance of the machine, the following should be randomly supplied accessories and tools are shown in Table 1.
Table 1
Name Quantity
A full horn machine
Rivet 1 set
Special adjustment tool set 1
GB/T 38193-2019 | JB/T 12396-2015 | GB/T 4346-2008 | GB/T 25663-2010 | GB/T 25658.2-2010 | GB/T 25658.1-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 25661.2-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 25661.1-2010 — Plano-machining centres with traveling overhead cross rail - Part 1: Testing of the accuracy
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 25661.2-2010
$195.00