GB/T 25403-2010Test facilities for agricultural irrigation equipment (English PDF)
农业灌溉设备用试验装置
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25403-2010 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
March 1, 2011
Scope
GB/T 25403-2010 is the English-translated version of 农业灌溉设备用试验装置.
GB/T 25403-2010 — This standard specifies the evaluation of agricultural irrigation equipment test equipment system component design, selection, installation and use.
This standard applies to GB/T 17187, ISO 15886, GB/T 19794, GB/T 19793, GB/T 18688, GB/T 18689, GB/T 18691 Test method and GB/T 18692 regulations, to the irrigation system components, in particular the test drippers, sprinklers and valves offer Enough information.
Found what you need?
Document preview — GB/T 25403-2010
National Standard of the People's Republic of China
- ICS
- 65.060.35
- Classification
- B 91
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This standard is identical with ISO/T R15155.2005 "Agricultural irrigation equipment test device" (in English).
This standard is equivalent translation ISO/T R15155.2005.
For ease of use, this standard made the following editorial changes.
The term --- the "Technical Report" to "this standard";
--- Delete foreword international standards;
--- Normative references added GB/T 19001 standard;
--- Delete Chapter 2 Note 1;
--- As an alternative to the decimal by decimal comma ",". ",";
--- Of ISO/T R15155. other international standards referenced in 2005, has been adopted as the country with the corresponding international standard in place standard.
The Standard Appendix A, Appendix B, Appendix C is informative appendix.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized.
This standard is mainly drafted by. Chinese Academy of Agricultural Mechanization Sciences, Zhejiang Institute of Mechanical and Electrical Co., Ltd. Zhejiang Feng ball pump Industry Co., Ltd., Zhejiang Friends of Motor Pump Co., Ltd., Zhejiang New Territories Pump Co., Ltd., Zhejiang pump product quality inspection center, National Electrical and Mechanical Components Product Quality Supervision and Inspection Center, Zhejiang valve product quality inspection center.
1 Scope
This standard specifies the evaluation of agricultural irrigation equipment test equipment system component design, selection, installation and use.
This standard applies to GB/T 17187, ISO 15886, GB/T 19794, GB/T 19793, GB/T 18688, GB/T 18689, GB/T 18691 Test method and GB/T 18692 regulations, to the irrigation system components, in particular the test drippers, sprinklers and valves offer Enough information.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 17187 Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (GB/T 17187-2009, ISO 9261:2004, IDT) GB/T 18688 Test method for pressure loss of agricultural irrigation equipment irrigation valves (GB/T 18688-2002, idtISO 9644.
1993)
GB/T 18689 Agricultural irrigation equipment - Manually operated small plastics valves (GB/T 18689-2002, eqvISO 9911.1993) GB/T 18691 Agricultural irrigation equipment check (GB/T 18691-2002, eqvISO 9952.1993) GB/T 18692 Agricultural irrigation equipment direct acting pressure regulator (GB/T 18692-2002, eqvISO 10552.1993) GB/T 19001 quality management system requirements (GB/T 19001-2008, ISO 9001:2008, IDT) GB/T 19793 Agricultural irrigation equipment hydrodynamic irrigation valves (GB/T 19793-2005, ISO 9635:1990, Irrigation equipment-Hydraulicalyoperatedirrigationvalves, MOD) GB/T 19794 Agricultural irrigation equipment dosing valve technical requirements and test methods (GB/T 19794-2005, ISO 7714.
1995, MOD)
GB/T 27025-2008 testing and calibration laboratories General requirements (ISO/IEC 17025:2005, IDT) ISO 15886-1:2004 Agricultural irrigation equipment - Sprinklers - Part 1. Terminology and classification ISO 15886-3:2004 Agricultural irrigation equipment - Sprinklers - Part 3. water distribution characteristics and test methods
3 Terms and Definitions
The following terms and definitions apply to this standard.
Test device testbench Integration of the various components used for agricultural irrigation equipment test, including water supply/water storage tank, pipes, fittings and instrumentation.
Test facilities testfacility Integrated valve used for agricultural irrigation, sprinklers and drippers test a variety of facilities, including water supply, test equipment and venues.
Effective NPSH netpositivesuctionheadavailable Centrifugal Impeller suction head minus the total available at the corresponding vapor pressure of water head.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 18689Agricultural irrigation equipment -- Manually operated small plastics valves
- GB/T 18689-2002Agricultural irrigation equipment -- Manually operated small plastics valves
- GB/T 18691Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements
- GB/T 18691-2002Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements
- GB/T 18692Agricultural irrigation equipment - Direct-acting pressure-regulating valves
- GB/T 18692-2002Agricultural irrigation equipment - Direct-acting pressure-regulating valves
GB/T 17187 · GB/T 17187-2009 · ISO 9261 · GB/T 18688 · GB/T 18688-2002 · ISO 9001 · GB/T 19793 · GB/T 19793-2005 · ISO 9635 · GB/T 19794 · GB/T 19794-2005 · ISO 7714 · ISO/IEC 17025 · ISO 15886
How to Download GB/T 25403-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18689-2009 — Agricultural irrigation equipment -- Manually operated small plastics valves
GB/T 18691.1-2021 — Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements
GB/T 18691.2-2021 — Agricultural irrigation equipment - Irrigation valves - Part 2: Isolating valves
Secure payment via Stripe
Payments accepted
GB/T 25403-2010
$185.00