GB/T 25355-2010Aircraft -- Ground-based de-icing/anti-icing methods with fluids (English PDF)
航空器 地面除冰防冰液体法
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25355-2010 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
March 1, 2011
Scope
GB/T 25355-2010 is the English-translated version of 航空器 地面除冰防冰液体法.
GB/T 25355-2010 — This standard specifies the method of anti-icing of aircraft ground deicing minimum requirements, it ICAO (ICAO) Aircraft Ground Anti-icing deicing Operation Manual (Doc.9640-AN/940) and related regulations consistent to ensure that transport operations in icing conditions safety of the aircraft.
This standard does not detail the specific model provisions. The content of this standard, give priority to the manual, program, or method of aircraft manufacturers published.
Manuals, procedures or methods airlines published the contents of this standard complement. Application of this standard procedures can effectively remove the serious impact of aircraft aerodynamic characteristics and handling characteristics of frost, ice or snow. This standard does not include the use of mechanical de-icing anti-icing.
Found what you need?
Document preview — GB/T 25355-2010
National Standard of the People's Republic of China
- ICS
- 49.100
- Classification
- V 55
Issued by: Standardization Administration of China
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and abbreviations
- 5 4 General requirements
- 6 Quality Assurance Program
- 7 Staff training and qualification requirements
- 8 De-icing anti-icing fluid requirements
- 9 9 contaminant inspection
- 10 Program
- 11 Restrictions and prevention
- 12 Anti-icing of aircraft de-icing after the general requirements
- Check 13 after deicing anti-icing
- 14 Pre-takeoff checks and pre-takeoff contamination inspection
- 15 Communication program
- 16-bit machine away deicing anti-icing procedures
- 17 18 Hold Time
- Appendix A (normative appendix) ISO I type liquid and water mixture application of the principles and the expected retention time Example
- Appendix B (Normative Appendix) ISO type II liquid, ISO III type liquid, ISO IV type liquid and water mixture and the application of the principles is expected to remain
Foreword
This standard is identical with ISO 11076:2006 "Aircraft ground deicing liquid anti-icing Law" (in English).
For ease of use, this standard made the following editorial changes.
--- The "this International Standard" be replaced by "this standard";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Deleted international standards Preface Introduction.
This standard is proposed and managed by the Civil Aviation Administration of China.
This standard was drafted. Civil Aviation Administration of China Second Institute.
1 Scope
This standard specifies the method of anti-icing of aircraft ground deicing minimum requirements, it ICAO (ICAO) Aircraft Ground Anti-icing deicing Operation Manual (Doc.9640-AN/940) and related regulations consistent to ensure that transport operations in icing conditions safety of the aircraft.
This standard does not detail the specific model provisions.
The content of this standard, give priority to the manual, program, or method of aircraft manufacturers published.
Manuals, procedures or methods airlines published the contents of this standard complement.
Application of this standard procedures can effectively remove the serious impact of aircraft aerodynamic characteristics and handling characteristics of frost, ice or snow.
This standard does not include the use of mechanical de-icing anti-icing.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard are encouraged to study whether the parties to the agreement in accordance with the You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 20856-2007 Newtonian aircraft de-icing and anti-icing fluids ISO I type (ISO 11075:1993, IDT) ISO 9001:2000 quality management system requirements ISO 11077 Air Self-propelled Deicing Vehicle Functional requirements ISO 11078 aircraft de-icing and anti-icing fluids ISO II type, ISO III type, ISO IV type ICAOdoc9640-AN/940 ground deicing of aircraft anti-icing operations manual CCAR121.649 operation in icing conditions JAR-OPS1.035 quality system JAR-OPS1.345 and ACJ1.345 ice and other contaminants, terrestrial processes CAR (Canadian Aviation Regulations) Section VI, Section 2, and flight operations system, 602.11, aircraft icing CAR (Canadian Aviation Regulations) 622.11 standard, ground icing operations FAAAC120-59 air carrier internal review outline FAAAC120-60 ground deicing anti-icing procedures SAEAIR9968 thickening type of aircraft de-icing anti-icing fluid viscosity test
3 Terms and Definitions
The following terms and definitions apply to this standard.
Active cream activefrost Cream state being formed.
NOTE. When the aircraft surface temperature is equal to or lower than 0 °C (32 °F) and equal to or below the dew point when active frost.
Anti-icing A precaution, available for a limited time (holding time) to provide protection as deicing surfaces of aircraft, to prevent the formation of frost or ice and the accumulation of snow or slush is.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 11075 · ISO 9001 · ISO 11077 · ISO 11078
How to Download GB/T 25355-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25355-2010
$435.00