GB/T 24937-2010Safety equipment requirement for all-terrain vehicles (English PDF)
全地形车安全防护装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24937-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 9, 2010
Implementation date
December 1, 2010
Scope
GB/T 24937-2010 is the English-translated version of 全地形车安全防护装置.
GB/T 24937-2010 is the Chinese standard "Safety equipment requirement for all-terrain vehicles". Its scope clause reads: This standard specifies the vehicle and all-terrain vehicle assembly and major security-related technical requirements and the corresponding test methods.
This standard applies to all types of ATVs. Its clauses include terms and definitions; vehicle.
Found what you need?
Document preview — GB/T 24937-2010
National Standard of the People's Republic of China
- ICS
- 43.020
- Classification
- T 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 vehicle
- 5 steering
- 7 with 3 lines
- 8 drivetrain
- 9 Body
- Appendix A (normative) four all-terrain vehicle foot 6 Environmental Requirements
- Appendix B (normative) all-terrain vehicle roof strength test requirements
1 Scope
This standard specifies the vehicle and all-terrain vehicle assembly and major security-related technical requirements and the corresponding test methods.
This standard applies to all types of ATVs.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 7258-2004 the safe operation of motor vehicles technical conditions
GB 8410 combustion characteristics of automotive interior materials (GB 8410-2006, FMVSS571.302, NEQ)
GB 9656 automotive safety glass (GB 9656-2003, ECER43.2000, NEQ)
GB 10395.1 agriculture and forestry machinery - Safety - Part 1. General (GB 10395.1-2009, ISO 4254-1.2008, MOD)
GB 11552 passenger internal projections (GB 11552-2009, ECER21, MOD)
GB 11566 External projections of passenger cars (GB 11566-2009, ECER26.2007, MOD)
GB 15084 motor vehicle rear-view mirror the performance and installation requirements (GB 15084-2006, ECER46, MOD)
GB 17352 motorcycles and mopeds mirrors and installation requirements (GB 17352-1998, neqECENo.81)
GB 20074 motorcycles and external projections (GB 20074-2006,97/24/ECC3, NEQ)
GB 24927 all-terrain vehicle seat belt and fixed-point demand
GB 24932 all-terrain vehicle seats, fixed head restraints and requirements
GB/T 24935 ATVs maximum roll angle stability test methods
GB/T 24936 ATVs term
3 Terms and Definitions
Terms and definitions GB/T 24936 apply to this standard established.
4 vehicle
4.1 The number of all types of all-terrain vehicle ride Approved
4.1.1
I four-wheel all-terrain vehicle riding is only for the driver. Type II four all-terrain vehicles, set up a dedicated fixed seats, except the driver may be outside
Then take one.
4.1.2-terrain vehicles and multi-purpose entertainment venue type II width of the front car seat approved by not less than two people are 1200mm. Rear vertical
To (all-terrain vehicle with the same forward direction) to set a fixed seat (seat depth of not less than 400mm, the distance between the driver's seat is not less than
650mm) per 400mm seat cushion width approved 1 and a maximum of three people.
4.2 Specific Power
ATVs not less than the power of 4.0kW/t.
Note. The specific power of the engine maximum net power (or 0.9 times the rated power of the engine, or 0.9 times the rated power of the engine) and the maximum permissible total ATVs
Quality ratio.
4.3 Stable Roll Angle
Load, under static, all-terrain vehicles left and right maximum roll stability angle is not less than 25 °. Test methods in GB/T 24935.
GB 24550-2024 | GB/T 24551-2021 | GB/T 24549-2020 | GB/T 47804.3-2026 | GB/T 47804.2-2026 | GB/T 47804.1-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24937-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24937-2010
$195.00