GB/T 24739-2009Mechanical drawings - Representation for declining component of mechanical parts (English PDF)
机械制图 机件上倾斜结构的表示法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24739-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 30, 2009
Implementation date
September 1, 2010
Scope
GB/T 24739-2009 is the English-translated version of 机械制图 机件上倾斜结构的表示法.
GB/T 24739-2009 is the Chinese standard "Mechanical drawings - Representation for declining component of mechanical parts". Its scope clause reads: This standard specifies the real shape on the mechanical structure of the tilt angle and real representation.
This standard applies to mechanical drawing pattern inclined structure on parts. Its clauses include terms and definitions; basic principles.
Found what you need?
Document preview — GB/T 24739-2009
National Standard of the People's Republic of China
- ICS
- 01.100.01
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Basic Principles
1 Scope
This standard specifies the real shape on the mechanical structure of the tilt angle and real representation.
This standard applies to mechanical drawing pattern inclined structure on parts.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4457.4 Mechanical drawings Fatou line (GB/T 4457.4-2002, ISO 128-24.1999, Technical drawings-Generalprinciplesofpresentation-Part 24. Linesonmechanicalengineeringdrawing, MOD)
GB/T 4458.1 Mechanical drawings - view (GB/T 4458.1-2002, ISO 128-34.2001, Technical drawings-Generalprinciplesofpresentation-Part 34. Viewsonmechanicalengineeringdrawings, MOD)
GB/T 4458.4 Mechanical drawings - Dimensioning
GB/T 4458.6-2002 mechanical sectional drawings - view and a sectional view (ISO 128-44.2002, Technical drawings-Generalprinciplesofpresentation-Part 44. Sectionsonmechnicalengineeringdrawings, MOD)
GB/T 14692 Technical drawings - Projection methods (GB/T 14692-2008, ISO /DIS5456.1993, NEQ)
GB/T 16948 Technical product documentation - Vocabulary projection method and terminology (GB/T 16948-1997, eqvISO 10209-2.1993)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
And a projection plane substantially parallel to a projection plane with two substantially straight inclined position.
3.2
And three basic projection surface are inclined straight position.
3.3
And a substantially vertical plane of projection, and the other two substantially planar projection plane inclined position.
3.4
And the projection surface are three basic plane inclined position.
Note. The three basic projection surface is defined as the space of three mutually perpendicular projection surface, they are an integral part of the six basic projection surface.
4 Basic Principles
4.1
The basic principle reflects real mechanical inclination structure shaped pattern solid angle of projection surface should transform method (method of changing plane) drawn transform projection plane method
As shown in Appendix B.
GB/T 23901.4-2019 | GB/T 23901.5-2019 | GB/T 23906-2009 | GB/T 24734.1-2009 | GB/T 24734.11-2009 | GB/T 24734.10-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 24739-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 24739-2009
$285.00