GB/T 24711-2009Continuous thermoforming vacuum and vacuum - gas flushing packaging machine (English PDF)
连续热成型真空（充气）包装机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24711-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 15, 2009
Implementation date
July 1, 2010
Scope
GB/T 24711-2009 is the English-translated version of 连续热成型真空（充气）包装机.
GB/T 24711-2009 is the Chinese standard "Continuous thermoforming vacuum and vacuum - gas flushing packaging machine".
Its scope clause reads: This standard specifies the terms and definitions, models and basic parameters continuous thermoforming vacuum (inflatable) packaging machine (hereinafter referred to as "packaging machine"), and Requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements.
This standard applies to the use of composite plastic film (or sheet) as a packaging material, and by thermoforming, vacuum (inflatable) sealing, segmentation Automatic continuous operation process, the material for heat-seal packaging machine, widely used in food, electronics, medical, chemical and other industries. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24711-2009
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- A 84
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the terms and definitions, models and basic parameters continuous thermoforming vacuum (inflatable) packaging machine (hereinafter referred to as "packaging machine"), and
Requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements.
This standard applies to the use of composite plastic film (or sheet) as a packaging material, and by thermoforming, vacuum (inflatable) sealing, segmentation
Automatic continuous operation process, the material for heat-seal packaging machine, widely used in food, electronics, medical, chemical and other industries.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB 2894 Safety Signs and use guidelines
GB/T 5048 proof packaging
GB 5226.1-2002 Safety of machinery electrical equipment Part 1. General requirements (IEC 60204-1.2000,
IDT)
GB/T 7311 classification and packaging machinery Model methodology
GB/T 9969 General Instructions industrial products
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB 16179 the use of safety signs
GB 16798 Food Machinery Safety and Health
GB 19891 Safety of machinery designed for hygiene requirements (GB 19891-2005, ISO 14159.2002, MOD)
JB/T 7232 packaging machinery sound power level measurement Simple Method
JB7233 packaging machinery - Safety requirements
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Can automatically complete the next film thermoforming, automatic or manual filling materials, vacuum (vacuum inflatable), sealing, cutting, and other continuous action, for the material feed
Sealing packaging line packaging machine.
3.2
Under normal atmospheric pressure outside, within the rated time evacuated to a pressure minimum vacuum chamber.
3.3
In the outside world standard atmospheric pressure, the initial pressure in the vacuum chamber is 1kPa by 1min leakage test, increase the value of its pressure.
GB/T 17344-2025 | GB/T 25163-2025 | HJ 209-2017 | GB/T 29346-2025 | GB/T 29346-2012 | GB/T 24709-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 24711-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24711-2009
$165.00