GB/T 24684.1-2009Crop protection equipment -- Test methods for the evaluation of cleaning systems -- Part 1: Internal cleaning of complete sprayers (English PDF)

Foreword

GB/T 24684 "Standard Test Method for Evaluation of plant protection machinery and washing system" is divided into the following three parts.

--- Part 1. Internal sprayer machine cleaning;

--- Part 2. External cleaning of the sprayer;

--- Part 3. Internal tank cleaning.

This section is GB/T Part of 124,684.

This section identical with ISO 22368-1:2004 Test methods "plant protection machinery Evaluation cleaning system - Part 1. Sprayers Internal cleaning machine "(in English).

This section is equivalent translation ISO 22368-1:2004.

For ease of use, this section made the following editorial changes.

--- "ISO 22368-1:2004 this part" to "this Part";

--- Deleted international standards foreword;

--- With a decimal point "." As an alternative to the decimal point "." Appendix A of this section is normative appendix, Appendix B is an informative annex.

This part is proposed by China Machinery Industry Federation.

This part of the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized.

This section drafted by. Chinese Academy of Agricultural Mechanization Sciences, Ministry of Agriculture, Nanjing Institute of Agricultural Mechanization, Modern Agricultural Equipment Technologies AG Limited.

Introduction

For the following reasons, plant protection sprayer cleaning becomes more and more important.

--- In order to avoid contamination of the environment and the operator;

--- Pesticide that may occur because of an accidental discharge causing crop injury, triggering fears of increased pesticide residues, or Caused by pesticides mixing several mutually exclusive.

In addition, the relevant industrial sector may need to provide development guidelines washing system to assess the level of technological development and future technology base.

GB/T 24684.1 and GB/T 24684.2 provisions of the relevant test methods and internal and external cleaning sprayer, to provide users Evaluation of internal and external cleaning system as well as the overall performance of a method to determine the future technical performance basis. This series of standards for the spray organs Key components provides a separate chapter (see GB/T 24684.3).

This section evaluation of cleaning a particular part of the system provides test methods in detail the results obtained may be improved and perfected cleaning systems Provide evidence.

GB/T 24684.1-2009/ISO 22368-1:2004 Plant protection machinery Test methods for the evaluation of cleaning systems Part 1. Internal cleaning of the sprayer machine WARNING. Users should be familiar with this part of the routine laboratory practice. This section related to the use of all possible security not addressed Wide issues. Users should make their own provisions appropriate safety and health practices and to ensure compliance with relevant national safety and environmental provisions.

1 Scope

This section GB/T 24684 specifies the sprayer machine (including the tank) is mounted on the internal cleaning plant protection sprayer for Performance test methods for cleaning the system.

This section applies to plant protection and spraying liquid fertilizer suspended, towed and self-propelled agricultural sprayers.

This section does not apply to drugs having direct injection sprayer system.

2 Test conditions

Test should be carried out under the following conditions.

Test solution temperature. 5 °C ~ 25 °C.

Air temperature. 5 °C ~ 25 °C.

Relative humidity. > 30%.

When tested outdoors, it should consider the impact of weather/climate conditions.

3 Test