GB/T 24683-2009Equipment for crop protection -- Test methods for air-assisted sprayers for bush and tree crops (English PDF)
植物保护机械 灌木和乔木作物用风送式喷雾机 试验方法
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24683-2009 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
November 30, 2009
Implementation date
April 1, 2010
Scope
GB/T 24683-2009 is the English-translated version of 植物保护机械 灌木和乔木作物用风送式喷雾机 试验方法.
GB/T 24683-2009 — This standard specifies the characteristics and test methods for determination of shrubs, trees and vineyard crops with breeze-mounted sprayer.
This standard applies to suspended, towed and self-propelled sprayer breeze (including pneumatic atomizing spray machine). This standard specifies the test methods (laboratory) tests sprayer performance under controlled conditions to reduce the risk of environmental pollution as possible.
Found what you need?
Document preview — GB/T 24683-2009
National Standard of the People's Republic of China
- ICS
- 65.060.40
- Classification
- B 91
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Test conditions
- 3.1 Adjustment of sprayer
- 3.3 Sprayer environment
- 3.4 PTO speed
- 3.5 Sprayer gearbox
- 3.6 Installation angle adjustable fan
- 3.7 Degree of opening of adjustable fan outlet
- 3.8 Equipped with axial fans of tractor-mounted sprayer
- 3.9 Test liquid
Foreword
This standard is equivalent to using ISO 9898:2000 "Test methods of plant protection machinery shrubs and tree crop sprayer with a breeze" (In English).
This standard is equivalent translation ISO 9898:2000.
For ease of use, this standard made the following editorial changes.
--- "This International Standard" by "this standard";
--- Deleted international standards foreword;
--- ISO 9898:2000 international standard referenced with the international standard has been adopted as a standard in place of the corresponding country;
--- Spray pressure unit with "MPa" instead of "bar";
--- With a decimal point "." As an alternative to the decimal point "." Appendix A of this standard is a normative appendix.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized.
This standard was drafted. Chinese Academy of Agricultural Mechanization Sciences, Ministry of Agriculture, Nanjing Agricultural Mechanization Institute, Jiangsu University, Taizhou Regal Agricultural Machinery Co., Ltd.
1 Scope
This standard specifies the characteristics and test methods for determination of shrubs, trees and vineyard crops with breeze-mounted sprayer.
This standard applies to suspended, towed and self-propelled sprayer breeze (including pneumatic atomizing spray machine).
This standard specifies the test methods (laboratory) tests sprayer performance under controlled conditions to reduce the risk of environmental pollution as possible.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 20083.1-2006 breeze agricultural sprayer - Data sheets - Part 1. Typical format (ISO 13441-1:1997, MOD)
3 Test conditions
3.1 Adjustment of sprayer
Testing should be performed at the machine (rectifier gate, nozzle, deflector, etc.) normal working condition.
Structure 3.2 Sprayer the position of the deflector, the shape and direction of airflow outlet nozzle direction, as well as other means to improve the distribution of air or liquid are it shall be set forth in the report. You can use the sprayer pictures and schematics describing the structure of the sprayer.
3.3 Sprayer environment
Spray outlet direction should not be any obstacle within 5m.
3.4 PTO speed
Testing should be conducted at least at the rated speed of the power output shaft (540 ± 5) r/min.
NOTE. If the sprayer is rated speed 1000r/min operation, the power output shaft speed (1000 ± 10) testing r/min.
3.5 Sprayer gearbox
If the fan drive power transmission system includes a transmission, then the test should cover all of the gear box gear and should be measured Power output shaft speed and fan speed.
3.6 Installation angle adjustable fan
For adjustable fan blade mounting angle, at least at the angle recommended by the manufacturer for testing. If the manufacturer does not recommend the blade angle, Intermediate position adjustment range should be used or the angle closest to the middle position for testing.
3.7 Degree of opening of adjustable fan outlet
With adjustable air outlet opening of the sprayer, at least you should use the manufacturer's recommended outlet width test. If the manufacturer does not push Recommended outlet width, should be in the middle of the adjustment range, or the degree of opening closest to the middle position will be.
3.8 Equipped with axial fans of tractor-mounted sprayer
It should indicate the height of the fan shaft in the report.
3.9 Test liquid
Use tap water. To test the use of tracers or dyes, the report should be written.
GB/T 24683-2009/ISO 9898:2000
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 24683-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20083.1-2006 — Air-assisted agricultural sprayers -- Data sheets -- Part 1: Typical layout
GB/T 3402.2-2026 — Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties
GB/T 3402.1-2026 — Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications
Secure payment via Stripe
Payments accepted
GB/T 24683-2009
$215.00