GB/T 24431-2009Equipment and facilities in the prostheses and orthoses fitting units (English PDF)
假肢、矫形器装配机构设施设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24431-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2009
Implementation date
December 1, 2009
Scope
GB/T 24431-2009 is the English-translated version of 假肢、矫形器装配机构设施设备.
GB/T 24431-2009 is the Chinese standard "Equipment and facilities in the prostheses and orthoses fitting units". Its scope clause reads: This standard specifies the prosthetics and orthotics assembly facility should have venues, facilities and equipment types and specifications.
This standard applies to all types of institutions engaged in prosthetic or orthotic clinical assembly. This standard does not apply to products in the orthopedic components, materials and general orthotics finished products or sales. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24431-2009
National Standard of the People's Republic of China
- ICS
- 11.040.40
- Classification
- C 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 5 2 facilities
1 Scope
This standard specifies the prosthetics and orthotics assembly facility should have venues, facilities and equipment types and specifications.
This standard applies to all types of institutions engaged in prosthetic or orthotic clinical assembly.
This standard does not apply to products in the orthopedic components, materials and general orthotics finished products or sales.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 14191.1 Prosthetics and orthotics academic language - Part 1. Basic terminology external limb prostheses and external orthoses
JGJ/50-2001 urban roads and buildings accessible design specifications
3 Terms and Definitions
GB/T 14191.1 well established in the following terms and definitions apply to this standard.
3.1
For the reception or other injury, disease need to install assistive devices physically disabled patients and be functional disability or workplace inspections.
3.2
Or other injury to the patient need to install assistive devices physically disabled disease or physical conduct stump measurements taken plaster workplace.
3.3
Prosthetics, orthotics female or male trimming processing processing sites.
3.4
On the male composite material or a thermoplastic sheet formed by the process of working places evacuated.
3.5
Already molded prosthetic or orthotic device for grinding, shape modification, material cutting and processing of other places.
3.6
Prostheses or orthoses line, assembly, adjustment, modification of the workplace.
3.7
Conduct training prosthetic wear off, compensatory training, gait training and rehabilitation place.
3.8
Storing prosthetic or orthotic components needed for the production of plastic sheet, chemical materials room.
YY/T 1680-2020 | GB/T 39381.1-2020 | YY/T 1571-2017 | GB/T 24434-2025 | GB/T 24437-2023 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24431-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24431-2009
$145.00