GB/T 2406.1-2008Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance (English PDF)
塑料 用氧指数法测定燃烧行为 第1部分:导则
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2406.1-2008 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Level / Type
National · Recommended
Issue date
August 4, 2008
Implementation date
April 1, 2009
Scope
GB/T 2406.1-2008 is the English-translated version of 塑料 用氧指数法测定燃烧行为 第1部分:导则.
GB/T 2406.1-2008 is the Chinese standard "Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance". Its scope clause reads: 1.1 This Part of GB/T 2406 constitutes a guidance document for the OI test.
It provides information to guide the reader in the use of the test procedures described in Parts 2 and 3. Its clauses include test principles.
Found what you need?
Document preview — GB/T 2406.1-2008
National Standard of the People's Republic of China
- ICS
- 83.080
- Classification
- G 31
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Contents
- Foreword3
- Introduction5
- 1 Scope6
- 2 Normative References6
- 3 Test Principles6
- 4 Test Applicability7
- 5 Specimen Preparation8
- 6 Apparatus8
- 7 Operating Conditions9
- 8 Conclusions11
- Annex A12
1 Scope
1.1 This Part of GB/T 2406 constitutes a guidance document for the OI test. It provides information to guide the reader in the use of the test procedures described in Parts 2 and
3.
1.2 ISO 4589-2 describes a method for determining the minimum concentration of oxygen
by percentage volume in a mixture of oxygen and nitrogen introduced at 23 °C ± 2 °C that will just support combustion of a material under specified test conditions. The results are defined as OI values. For comparative purposes, a procedure is also provided for determining whether or not the OI value of a material lies above some specified minimum value, which is particularly important for quality control purposes. There is also a procedure for the testing of thin films between 20 µm and 100 µm thickness.
1.3 ISO 4589-3 describes methods of carrying out the same determination over a range of temperatures typically between 25 °C and 150 °C (up to 400 °C may be used). The results are defined as OI value at test temperature. ISO 4589-3 also describes a method for determining the temperature at which the OI of the small vertical test specimens is 20.9.
The result is defined as the flammability temperature. ISO 4589-3 is not applicable to materials having an OI value of less than 20.9 at 23 °C.
2 Normative References
The provisions in following documents become the provisions of this Part of GB/T 2406 through the reference in this Part. For dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies.
ISO 4589-2:1996, Plastics - Determination of burning behaviour by oxygen index -
Part 2: Ambient-temperature test.
ISO 4589-3:1996, Plastics - Determination of burning behaviour by oxygen index - Part
3: Elevated-temperature test.
3 Test Principles
3.1 In ISO 4589-2, the material can be tested either as a rigid specimen or as a flexible
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 4589 · ISO 4589
Cited by
- GB/T 2406.3-2022Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- DL/T 1983-2019Technical requirements of water collecting device for wet cooling tower
- DL/T 742-2019Quality standard of plastic parts for wet cooling tower
- MZ/T 109-2018Supportforsignsofgeographicalname
- JB/T 11329-2013Anti-tracking Heat-shrinkable Insulation Tubing
- JB/T 11374-2013Glass Fiber Projecting Fabric
How to Download GB/T 2406.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2406.2-2009 — Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
GB/T 2406.3-2022 — Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
GB/T 2406.4-2025 — Plastics - Determination of burning behaviour by oxygen index - Part 4: High gas velocity test
GB/T 2406.1-2008
$55.00