GB/T 23455-2009Flexible skin plaster for exterior wall (English PDF)
外墙柔性腻子
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23455-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2009
Implementation date
January 1, 2010
Scope
GB/T 23455-2009 is the English-translated version of 外墙柔性腻子.
GB/T 23455-2009 is the Chinese standard "Flexible skin plaster for exterior wall". Its scope clause reads: This standard specifies the external flexible putty classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the building's exterior with a flexible cracking putty leveling. Its clauses include categories and tags; requirements.
Found what you need?
Document preview — GB/T 23455-2009
National Standard of the People's Republic of China
- ICS
- 91.100.10
- Classification
- Q 27
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Categories and tags
- 4 Requirements
1 Scope
This standard specifies the external flexible putty classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the building's exterior with a flexible cracking putty leveling.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1728-1979 paint, putty film drying time assay
GB/T 1748 putties flexibility assay
GB/T 4100-2006 ceramic tiles
GB/T 9271 Paints and varnishes - Standard panels for
GB/T 9779-2005 multi-layer architectural coatings
JC/T 412.1-2006 fiber cement plates - Part 1. Non-asbestos fiber cement flat
JC/T 985-2005 leveling the ground with cement-based mortar
3 Categories and tags
3.1 Category
External flexible putty into its component single-component and two-component.
Single component (Code D). prefabrication, including cement, re-dispersible polymer powders, fillers and other additives, etc. and stirring the powder
Like product, when used according to the manufacturer's matching Stir water use.
Two-component (Code S). prefabrication, including powdery components made of cement, fillers and other additives and the polymer emulsion group
A liquid component, when used according to the manufacturer's matching the two components according to the ratio stir well before use.
3.2 Model
The applicable base is divided into two types.
Type I. suitable for cement mortar, concrete, exterior insulation base.
II type. apply to exterior wall ceramic tiles base.
3.3 mark
Labeled products in the following order. product name, category, type and standard number.
Example. Two-component flexible putty for exterior wall ceramic tiles base marked.
External flexible putty S II GB/T 23455-2009
4 Requirements
External flexible putty shall comply with the requirements of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 23455-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23455-2009
$135.00