GB/T 23299-2009Ships and marine technology -- Hydrostatic release units (English PDF)

Foreword

This standard is equivalent to using ISO 15734:2001 "Ships and marine technology hydrostatic release unit" (in English).

This standard is equivalent translation ISO 15734:2001.

For ease of use, this standard made the following editorial changes.

--- "This International Standard" be replaced by "this standard";

"." --- With a decimal point instead of a comma as the decimal point, "";

--- Delete international standards foreword.

The standard proposed by China State Shipbuilding Corporation.

This standard by the National Standardization Technical Committee outfitting the ship lifesaving equipment Technical Committee (SAC/TC129/SC1) centralized.

This standard was drafted. Technical and Economic Research Institute of China Shipbuilding Industry.

1 Scope

This standard specifies the formula connected with the free-floating life-saving equipment (including inflatable liferaft and EPIRB device, referred EPIRB) Then the hydrostatic release unit (referred to as the releaser, HRU) performance and test requirements. Compliance with this standard and has been recognized as the competent authorities of hydrostatic Pressure release, can be regarded as in line with 1974 International Convention for the Safety of Life at Sea and the International Maritime Organization (IMO) life-saving equipment (LSA) rule.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

ISO 9227:1990 artificial atmosphere corrosion test salt spray test

3 General requirements