GB/T 23105-2008Household and similar electrical pump (English PDF)
家用和类似用途电动水泵
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23105-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 23105-2008 is the English-translated version of 家用和类似用途电动水泵.
GB/T 23105-2008 is the Chinese standard "Household and similar electrical pump".
Its scope clause reads: This standard specifies the electric water pump for household and similar purposes (hereinafter referred to as "pump") terms and definitions, product classifications, technical requirements, test Test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the water temperature does not exceed 40 °C, rated voltage 220V, rated input power not exceeding 1000W, in the home, shops, Schools and other places by the water pump non-professionals. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 23105-2008
National Standard of the People's Republic of China
- ICS
- 97.180
- Classification
- Y 69
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 5 Technical requirements
- 7 Inspection rules
- 8 signs, packaging, transportation and storage
1 Scope
This standard specifies the electric water pump for household and similar purposes (hereinafter referred to as "pump") terms and definitions, product classifications, technical requirements, test
Test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the water temperature does not exceed 40 °C, rated voltage 220V, rated input power not exceeding 1000W, in the home, shops,
Schools and other places by the water pump non-professionals.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1019-2008 Household and similar electrical appliances General Packaging
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt Spray (GB/T 2423.17-
2008, IEC 60068-2-11. 1981, IDT)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 3216-2005 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906.1999, MOD)
Particular requirements GB 4706.66 Household and similar electrical appliances Safety pump (GB 4706.66-2003, IEC 60335-2-41.
1996, IDT)
GB 5296.2 consumer use - Part 2. Household and similar electrical appliances
GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test (GB/T 9239.1-2006, ISO 1940-1.2003, IDT)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Mechanical, hydraulic and electrical components of the apparatus for transporting liquid.
3.2
During normal operation of the electrical component is completely or partially immersed in the liquid pump.
Note. The motor windings may be dry, soaked in oil or liquid inside the pump suction.
3.3
During normal operation the motor axis vertical, and the electrical components are not immersed in the liquid pump.
NOTE. The water level switch controllers, such as may be immersed in the liquid.
3.4
During normal operation the motor axis horizontal state, and the electrical components are not immersed in the liquid pump.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23105-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23105-2008
$165.00