GB/T 22576.3-2021Medical laboratories—Requirements for quality and competence—Part 3: Requirements in the field of urine examination (English PDF)
医学实验室 质量和能力的要求 第3部分:尿液检验领域的要求
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22576.3-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 21, 2021
Implementation date
June 1, 2022
Scope
GB/T 22576.3-2021 is the English-translated version of 医学实验室 质量和能力的要求 第3部分:尿液检验领域的要求.
GB/T 22576.3-2021 is the part of the Chinese series on the quality and competence of medical laboratories that covers urine examination.
It sets the requirements for the laboratory that performs general urine testing: the personnel, the accommodation and equipment, the pre-examination handling of the specimen, the examination procedures and their validation, the quality control and external assessment, the reporting of the results and the management of the records.
It applies to laboratories doing urine sediment analysis, urine dry chemistry and other qualitative urine testing, the quantitative and immunological work being covered by other parts.
Hospital laboratories and accreditation bodies use it. Issued on 21 May 2021, it has applied since 1 June 2022.
Found what you need?
Document preview — GB/T 22576.3-2021
National Standard of the People's Republic of China
- ICS
- 03.120.10
- Classification
- C 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Management requirements
- 4.1 Organization and Management Responsibilities
- 4.2 Quality Management System
- 4.3 Document Control
- 4.4 Service Agreement
- 4.5 Inspection by the entrusted laboratory
- 4.6 External services and supplies
- 4.7 Consulting Service
- 4.8 Resolution of complaints
- 4.9 Identification and control of nonconformities
- 4.10 Corrective action
- 4.11 Preventive measures
- 4.12 Continuous improvement
- 4.13 Record Control
- 4.14 Evaluation and audit
- 4.15 Management Review
- 5 Technical requirements
- 5.1 Personnel
- 5.2 Facilities and environmental conditions
- 5.3 Laboratory equipment, reagents and consumables
- 5.4 Pre-inspection process
- 5.5 Inspection process
- 5.6 Assurance of the quality of inspection results
- 5.7 Post-inspection process
- 5.8 Results report
- 5.9 Results release
- 5.10 Laboratory Information Management
- Appendix A (Normative) Morphological Recognition Requirements for Urine Test
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
This document is part 3 of GB/T 22576 "Requirements for the Quality and Capability of Medical Laboratories". This document and GB/T 22576.1 Cooperate and use together.
GB/T 22576 has released the following parts.
---Part 1: General requirements;
---Part 2: Requirements in the field of clinical hematology testing;
---Part 3: Requirements in the field of urine testing;
---Part 4: Requirements in the field of clinical chemistry testing;
---Part 5: Requirements in the field of clinical immunological testing;
---Part 6: Requirements in the field of clinical microbiology testing;
---Part 7: Requirements in the field of blood transfusion medicine.
Introduction
The services of medical laboratories are necessary for patient healthcare, so it is necessary to satisfy all patients and clinical personnel responsible for patient healthcare.
The needs of the staff. These services include application acceptance, patient preparation, patient identification, sample collection, transportation, storage, clinical sample processing and inspection And the interpretation of the results, reports and recommendations; in addition, the safety and ethical issues of medical laboratory work must also be considered.
As long as national laws and regulations and relevant standards require permission, it is expected that the services of medical laboratories include diagnosis and patient management, as well as Examination of patients in consultations and active participation in disease prevention. Each laboratory should provide its professionals with appropriate educational and scientific research opportunity.
GB/T 22576 stipulates the capabilities and quality of medical laboratories in all disciplines in the currently recognized medical laboratory service field. The requirements are to be composed of 11 parts.
---Part 1: General requirements. The purpose is to specify general requirements for the quality and competence of medical laboratories.
---Part 2: Requirements in the field of clinical hematology testing. The purpose is to regulate the quality and capacity of medical laboratories for clinical hematology Specific requirements in the inspection field.
---Part 3: Requirements in the field of urine testing. The purpose is to regulate the quality and capacity of medical laboratories in the field of clinical urine testing Specific requirements.
---Part 4: Requirements in the field of clinical chemistry testing. The purpose is to regulate the quality and capability of medical laboratories for clinical chemistry testing The specific requirements of the field.
---Part 5: Requirements in the field of clinical immunology testing. The purpose is to regulate the quality and capacity of medical laboratories for clinical immunology Specific requirements in the inspection field.
---Part 6: Requirements in the field of clinical microbiology testing. The purpose is to stipulate that the quality and capacity of medical laboratories are important for clinical microbiology. Specific requirements in the field of physical inspection.
---Part 7: Requirements in the field of blood transfusion medicine. The purpose is to stipulate that the quality and capacity of medical laboratories are important for the field of blood transfusion medicine. Body requirements.
---Part 8: Requirements for laboratory information systems. The purpose is to regulate the quality and capability of medical laboratories to the laboratory information system Specific requirements.
---Part 9: Requirements in the field of molecular diagnostics. The purpose is to stipulate that the quality and capabilities of medical laboratories are important for the field of molecular diagnostics. Body requirements.
---Part 10: Requirements in the field of cytopathological examination. The purpose is to regulate the quality and capacity of medical laboratories for cytopathology Check the specific requirements of the field.
---Part 11: Requirements in the field of histopathology examination. The purpose is to regulate the quality and capacity of medical laboratories for histopathology Check the specific requirements of the field.
The numbers and names of the chapters and articles of this document adopt the number and names of the chapters and articles in GB/T 22576.1, which are relevant in the field of urine testing. The requirements are given after the corresponding clauses.
1 Scope
This document specifies the requirements for the quality and competence of medical laboratories in the field of general urine testing.
This document is applicable to medical laboratories that conduct urine formed component analysis, urine dry chemical analysis, and other qualitative testing of urine components.
Note: Refer to GB/T 22576.4 for the quantitative analysis of urine biochemical components, and GB/T 22576.5 for the requirements of urine immunological analysis, Urine microbiological examination See GB/T 22576.6 for the requirements.
2 Normative references
The contents of the following documents in this document constitute an indispensable clause of this document through normative references in the text. Among them, dated For referenced documents, only the version corresponding to the date is applicable to this document; for undated referenced documents, the latest version (including all amendments) Applies to this document.
GB/T 22576.1-2018 Requirements for the quality and competence of medical laboratories
WS/T 348 Guidelines for collection and handling of urine specimens
WS/T 641 Clinical laboratory quantitative determination indoor quality control
YY/T 0996 Urine formed element analyzer (digital imaging automatic identification)
3 Terms and definitions
The terms and definitions defined in GB/T 22576.1-2018 apply to this document.
4 Management requirements
4.1 Organization and management responsibilities
It shall meet the requirements of 4.1 in GB/T 22576.1-2018.
4.2 Quality Management System
It should meet the requirements of 4.2 in GB/T 22576.1-2018.
4.3 Document control
It should meet the requirements of 4.3 in GB/T 22576.1-2018.
4.4 Service Agreement
It should meet the requirements of 4.4 in GB/T 22576.1-2018.
4.5 Inspection by the commissioned laboratory
It should meet the requirements of 4.5 in GB/T 22576.1-2018.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 22576.1-2018Medical laboratories - Requirements for quality and competence - Part 1: General requirements
- WS/T 348Collection and processing of urine specimens
- WS/T 641Internal quality control for quantitative measurement in clinical laboratory
- YY/T 0996Urine formed element analyzer(digital imaging automatic identification)
Similar standards
How to Download GB/T 22576.3-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
WS/T 348-2024 — Collection and processing of urine specimens
WS/T 641-2018 — Internal quality control for quantitative measurement in clinical laboratory
YY/T 0996-2015 — Urine formed element analyzer(digital imaging automatic identification)
Secure payment via Stripe
Payments accepted
GB/T 22576.3-2021
$195.00