GB/T 22070-2008Aqua-ammonia absorption refrigerating unit (English PDF)
氨水吸收式制冷机组
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22070-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 1, 2008
Implementation date
February 1, 2009
Scope
GB/T 22070-2008 is the English-translated version of 氨水吸收式制冷机组.
GB/T 22070-2008 is the Chinese standard "Aqua-ammonia absorption refrigerating unit". Its scope clause reads: This standard specifies the ammonia absorption chiller (hereinafter referred to as "units") terms and definitions, and basic parameters, requirements, testing Methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to more than 50kW cooling capacity, steam, gas or oil as a heating source of the single-stage ammonia absorption chiller. With Hot water or flue gas as a heating source of the ammonia absorption chiller can be implemented by reference. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 22070-2008
National Standard of the People's Republic of China
- ICS
- 27.200
- Classification
- J 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the ammonia absorption chiller (hereinafter referred to as "units") terms and definitions, and basic parameters, requirements, testing
Methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to more than 50kW cooling capacity, steam, gas or oil as a heating source of the single-stage ammonia absorption chiller. With
Hot water or flue gas as a heating source of the ammonia absorption chiller can be implemented by reference.
2 Normative references
The following documents contain provisions which, through reference in this standard, constitute provisions of this part. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 151 shell and tube heat exchangers
GB 4824 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement (GB 4824-2004,
CISPR11.2003, IDT)
GB 9237 cooling and heating with a mechanical refrigeration system security requirements (GB 9237-2001, eqv ISO 5149.1993)
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 17799.2 Electromagnetic compatibility - Generic standards - Immunity for industrial environments (GB/T 17799.2-2003,
IEC 61000-6-2.1999, IDT)
GB 18361-2001 lithium bromide absorption chiller (warm) water unit - Safety requirements
GB/T 18362-2001 direct-fired lithium bromide absorption chiller (warm) water unit
Determination of JB/T 4330-1999 refrigeration and air conditioning equipment noise
JB/T 4750 refrigeration apparatus pressure vessels
JB/T 7249 term refrigeration equipment
3 Terms and Definitions
JB/T 7249 and established the following terms and definitions apply to this standard.
3.1
A kind of steam, gas, fuel oil as a heating source, ammonia as a refrigerant, ammonia solution as absorbent for indirect refrigeration refrigeration, process, etc.
Monolithic unit.
3.2
The amount of the unit consumption of steam, gas and fuel oil, unit. kg/h or m3/h.
3.3
The heat source unit heat consumption in terms of value, unit. kW.
3.4
Cooling capacity is heated with the heat source consumption and the power consumption in addition to the ratio of income, its value is expressed in kW/kW.
GB/T 22068-2025 | GB/T 21360-2018 | GB/T 21361-2017 | GB/T 22069-2024 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 22070-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 22070-2008
$255.00