GB/T 21093-2007High-pressure mercury vapour lamps -- Performance specifications (English PDF)

Foreword

This standard corresponds to IEC 60188.:2001 "high-pressure mercury lamp performance requirements" (in English). This standard and one of IEC 60188.:2001 the degree of concordance is not equivalent.

This standard according to IEC 60188.:2001 "high-pressure mercury lamp performance requirements" redrafted, on this basis, combined with our country in recent years, high-pressure mercury the actual development of light and enacted.

The main content of this standard is revised in accordance with IEC 60188, in order to adapt to China's national conditions, the main differences are as follows.

1) Normative references.

--- GB/T 2900.65-2004 "Electrotechnical terminology lighting" instead of IEC 60050 (845) "International Electrotechnical Vocabulary (IEV) 845 Chapter. Lighting ";

--- GB 19652-2005 "discharge lamps (except fluorescent lamps) safety requirements" instead of IEC 62035 "discharge lamps (except fluorescent lamps) safety Claim";

--- GB/T 15042-2005 "Lamp accessories discharge lamps (except fluorescent lamps) with ballast performance requirements" instead of IEC 60923 "release Light ballasts (except fluorescent) performance requirements ";

--- Added GB/T 2828.1-2003 "Sampling procedures for the first part of the inspection by the reception quality limit (AQL) to retrieve the batch Inspection sampling plan "and GB/T 2829-2002" periodic inspection sampling procedures and tables (applicable to the stability of the test Test); "

--- Added GB/T 191-2000 "logo packaging transport and storage."

2) The following definition of 1.3 is added.

1.3.13 Individual life;

1.3.14 Average life expectancy averagelife;

1.3.15 lumenmaintenance lumen maintenance.

3) The classification and nomenclature added in 1.4 and the size of the lamp were checked with calipers. Lamp on the finished lamp with a standard amount Regulations for inspection. The initial value of the red ratio of the lamp is to be not less than 8% (this value is the recommended value and the IEC standard is undetermined).

4) Increased life characteristics and safety requirements.

5) Added light parameters to the lamp's parameter list.

6) Added "Inspection Rules" (Appendix D).

7) Added "Marking, Packaging, Transport and Storage" (Appendix E).

Need to explain a few questions.

1) The basis for the development of the technical parameters of the standard and level.

Since the IEC 60188 standard only specifies the electrical parameters of the lamp and the ballast, and the optical parameters, life parameters in the IEC standard does not the provisions of this standard in the non-equivalent based on the use of IEC 60188, with reference to several major international manufacturers of high-pressure mercury lamp product samples, Product-like real data as well as the major domestic manufacturers of high-pressure mercury lamp business standards, developed in this standard of technical indicators.

2) Electrical parameters. In accordance with the provisions of IEC 60188.

3) Optical parameters. Ratings and limits are based on China's major manufacturers to determine business standards.

4) Life. According to the international main high-pressure mercury lamp manufacturers sample data and China's major manufacturers to determine the level of business standards all life expectancy, individual life, lumen maintenance.

5) Dimensions. consistent with the provisions of IEC 60188.

6) As 700W and.2000W specifications of the lamp so far has not been consulted to the relevant manufacturer's information in the lamp parameter table in the parameters for these two specifications of the lamp is undecided.

This standard Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix F is a normative appendix.

From the date of implementation of this standard, QB/T 2051-1994 "fluorescent high-pressure mercury lamp" abolished at the same time.

This standard proposed by the China Light Industry Federation.

This standard by the National Lighting Standardization Technical Committee (SAC/TC224) centralized.

This standard was drafted. Philips Lighting Co., Ltd. Yaming, Osram (China) Lighting Co., Ltd., Beijing Institute of Light Sources, the state Electric Light Source Quality Supervision and Inspection Center (Beijing).

1 Overview