GB/T 2085.3-2009Aluminum powder - Part 3: Comminuted aluminum powder (English PDF)
铝粉 第3部分：粉碎铝粉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2085.3-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 15, 2009
Implementation date
February 1, 2010
Scope
GB/T 2085.3-2009 is the English-translated version of 铝粉 第3部分：粉碎铝粉.
GB/T 2085.3-2009 is the Chinese standard "Aluminum powder - Part 3: Comminuted aluminum powder". Its scope clause reads: This section provides crushed aluminum requirements, test methods, inspection rules, packaging, labeling, transportation, storage and contract (or purchase order) content.
This section applies to aluminum mechanical grinding solid aluminum metal. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 2085.3-2009
National Standard of the People's Republic of China
- ICS
- 77.160
- Classification
- H 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
1 Scope
This section provides crushed aluminum requirements, test methods, inspection rules, packaging, labeling, transportation, storage and contract (or purchase order) content.
This section applies to aluminum mechanical grinding solid aluminum metal.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB 190 packaging and marking of dangerous goods
GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage
GB/T 5314 sampling method powder metallurgy
GB/T 20975.4 aluminum and aluminum alloys - Part 4. Determination of iron content phenanthroline spectrophotometry
Determination of silicon content. GB/T 20975.5 aluminum and aluminum alloys - Part 5
Measured YS/T 617.1 aluminum-magnesium alloy powder and its physical and chemical properties Methods for determination of the first active alumina, active magnesium, aluminum-magnesium amount of activity
Given gas volumetric method
Determination of YS/T 617.3 aluminum-magnesium alloy powder and its physical and chemical properties - Part 3 Determination of moisture loss on drying method
YS/T 617.6 aluminum-magnesium alloy powder and its physical and chemical properties measurement method Part 6 measuring particle size distribution by sieving
Determination of YS/T 617.8 aluminum-magnesium alloy powder and its physical and chemical properties - Part 8 Determination of bulk density
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1
Isometric powder particles close to the irregular particle shape.
3.2
Metal powders bonded together without forming lumps.
4 Requirements
Grade 4.1
Crushed aluminum grades using "FLS" plus two to four digits expressed (Table 1), grade of "FLS" to crush aluminum logo
Code, grade the figures indicate the maximum aperture of aluminum mesh screening test selection.
4.2 Appearance
4.2.1
crushed aluminum silvery white or silver granules.
There should be no foreign matter or clumping 4.2.2 crushed aluminum.
4.3 size distribution and typical use
Pulverized aluminum powder particle size distribution as shown in Table 1. When the demand side, there are special requirements for particle size distribution, it can be negotiated with suppliers.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 2085.3-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2085.1-2007 — Aluminum powder - Part 1: Air atomized aluminium powder
GB/T 2085.1-2026 — Aluminium powder - Part 1: Air atomized aluminium powder
GB/T 2085.2-2019 — Aluminium powder—Part 2: Inflammable fine aluminium powder
Secure payment via Stripe
Payments accepted
GB/T 2085.3-2009
$105.00