Obsolete

GB/T 19954.1-2016Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions (English PDF)

电磁兼容 专业用途的音频、视频和娱乐场所灯光控制设备的产品类标准 第1部分:发射

Preview PDF

GB/T 19954.1 | Evolution and historical versions

Std IDTitleStatus
GB/T 19954.1-2016Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: EmissionsObsolete

GB/T 19954.1-2016 is obsolete. This page sells the obsolete edition, for projects and contracts that still cite it.

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for GB/T 19954.1-2016 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Level / Type

National · Recommended

Issue date

August 29, 2016

Implementation date

March 1, 2017

Scope

GB/T 19954.1-2016 is the English-translated version of 电磁兼容 专业用途的音频、视频和娱乐场所灯光控制设备的产品类标准 第1部分:发射.

GB/T 19954.1-2016 is the Chinese standard "Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions".

Its scope clause reads: This Part of GB/T 19554 specifies the limits and measurement methods of the apparatus covered by the applicable scope, which relate to the requirements of continuous and transient disturbances, conducted and radiated disturbances, which are the necessary electromagnetic compatibility requirements.

This Part applies to audio, video, audio-visual and entertainment lighting control apparatus for professional use as defined in Clause 3 and apparatus used in the electromagnetic environment described in Clause 4, including the professional digital apparatus defined in 3.5 and the components specified in 7.3.

This Part specifies that the disturbance signal frequency range is 0 Hz ~ 400 GHz, but does not make the requirements for the entire frequency band. See note 2.

Annex E provides relevant information on infrared emitters with wavelengths of 0.7 µm to 1.6 µm. This Part does not consider conditions of disturbance source or disturbed apparatus failure.

The apparatus defined in 3.4, 3.5 and 3.6 may be operated in any form of power supply, including. - public low-voltage power grids; - independent power grids with similar characteristics; - DC power supplies for specific apparatus; - built-in batteries of the apparatus; - standby generators.

Some of the standards referenced in this Part may not apply to independent low- voltage power grids. NOTE 1. In special cases, such as when an apparatus is in close proximity to a high-sensitivity apparatus, the limits shall be tightened and additional measurements shall be made to limit its electromagnetic emissions.

Professional user receiving apparatus may be very sensitive to disturbance. See Annex F for relevant information. This Part does not apply to. - consumer electronics products; - specially designed security system apparatus; - emission apparatus designed for wireless communications.

NOTE 2. In order to avoid interference, the manufacturer shall consider the characteristics of other apparatuses that may be in the same environment, to determine whether it is necessary to set the emission limits in an additional frequency range.

Found what you need?

Document preview — GB/T 19954.1-2016

National Standard of the People's Republic of China

ICS
33.160.20
Classification
M 74

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Contents

  • Foreword4
  • 1 Scope6
  • 2 Normative references7
  • 3 Terms and definitions8
  • 4 Electromagnetic environment10
  • 5 Disturbance phenomenon11
  • 6 Emission limits11
  • 7 Test conditions15
  • 8 Buyer/user documentations16
  • between 50 Hz ~ 50 kHz18
  • Annex B (Normative) Inrush current measurement method22
  • port conducted emission24
  • Annex D (Normative) System evaluation and field measurement25
  • emission27
  • and receiver antenna28
  • Bibliography37

1 Scope

This Part of GB/T 19554 specifies the limits and measurement methods of the apparatus covered by the applicable scope, which relate to the requirements of continuous and transient disturbances, conducted and radiated disturbances, which are the necessary electromagnetic compatibility requirements.

This Part applies to audio, video, audio-visual and entertainment lighting control apparatus for professional use as defined in Clause 3 and apparatus used in the electromagnetic environment described in Clause 4, including the professional digital apparatus defined in 3.5 and the components specified in 7.3.

This Part specifies that the disturbance signal frequency range is 0 Hz ~ 400 GHz, but does not make the requirements for the entire frequency band. See note 2.

Annex E provides relevant information on infrared emitters with wavelengths of 0.7 µm to 1.6 µm.

This Part does not consider conditions of disturbance source or disturbed apparatus failure.

The apparatus defined in 3.4, 3.5 and 3.6 may be operated in any form of power supply, including.

- public low-voltage power grids;

- independent power grids with similar characteristics;

- DC power supplies for specific apparatus;

- built-in batteries of the apparatus;

- standby generators.

Some of the standards referenced in this Part may not apply to independent low- voltage power grids.

NOTE 1. In special cases, such as when an apparatus is in close proximity to a high-sensitivity apparatus, the limits shall be tightened and additional measurements shall be made to limit its electromagnetic emissions.

Professional user receiving apparatus may be very sensitive to disturbance. See

Annex F for relevant information.

This Part does not apply to.

- consumer electronics products;

- specially designed security system apparatus;

- emission apparatus designed for wireless communications.

NOTE 2. In order to avoid interference, the manufacturer shall consider the characteristics of other apparatuses that may be in the same environment, to determine whether it is necessary to set the emission limits in an additional frequency range.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 4343.1 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 1. Emission

GB 4343.2 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 2. Immunity - Product family standard

GB/T 4365 Electrotechnical terminology - Electromagnetic compatibility

GB 9254 Information technology equipment - Radio disturbance characteristics -

Limits and methods of measurement

GB 10963.1 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installation - Part 1. Circuit-breakers for a.c. operation

GB 10963.2 Circuit-breakers for overcurrent protection for household and similar installation - Part 2. Circuit-breakers for a.c. and d.c. operation

GB/T 12060.3 Sound system equipment - Part 3. Methods of measurement on audio amplifiers

GB 13837 Sound and television broadcast receivers and associated equipment -

Radio disturbance characteristics - Limits and methods of measurement

GB 17625.1 Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)

GB 17625.2-2007 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

GB/T 17625.7 Electromagnetic compatibility - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 75 A and subject to conditional connection

GB 17799.4 Electromagnetic compatib...

GB/T 19954.2-2016 | GB/T 26686-2011 | GB/T 26685-2011 | GB/T 26684-2011 | GB/T 22123-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download GB/T 19954.1-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 19954.1-2016

$125.00