GB/T 19384.2-2012Textile machinery and accessories -- Yarn feeders and yarn control for knitting machines -- Part 2: Connecting dimensions for yarn feeders and yarn control devices (English PDF)

Foreword

GB/T 19384 "Textile machinery and accessories knitting machines Yarn feeders and yarn control devices" is divided into three sections.

--- Part 1. Terminology;

--- Part 2. associative dimensions;

--- Part 3. connecting cable and interconnect cable size.

This is Part 2 GB/T 19384 in.

This section according to GB/T 1.1-2009, GB/T 20000.2-2009 rules given in draft.

This section uses the translation method equivalent to international standards ISO 13990-2:2006 "Textile machinery and accessories knitting machines Yarn feeders and yarn Part 2-wire control device. associative dimensions "(in English).

Consistency correspondence between this part of international documents and normative references of our files are as follows.

--- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance (eqvISO 2768-1. 1989);

--- GB/T 19384.1-2012 Textile machinery and accessories knitting machine control apparatus - Part 1 - Yarn feeders and yarn. Term (ISO 13990-1:2006, IDT);

--- GB/T 19384.3-2012 knitting machines Textile machinery and accessories - Yarn feeders and yarn control - Part 3. Connect Cable and interconnect cable size (ISO 13990-3:2006, IDT);

For ease of use, this section made the following editorial changes.

--- "This International Standard" be replaced by "this section";

--- Delete ISO foreword.

This part is proposed by the China Textile Industry Association.

This part of the National Standardization Technical Committee Textile machinery and accessories (SAC/TC215) centralized.

This section from Ningbo Chee Sing Co., Ltd., Zhejiang Institute of Quality and Technical Supervision and Inspection, Cixi Sun State Textile Science & Technology Co., Division Hengqiang Technology Co., Ltd., Zhejiang, China Textile Machinery Association is responsible for drafting.

1 Scope

This section GB/T 19384 provides for knitting machines Yarn feeders and yarn control devices associated dimensions.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document.

ISO 2768-1. 1989 General tolerances - Part 1. No NOTE tolerances for linear and angular dimensions without individual tolerance (General tolerances-Part 1. Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindica-tions) ISO 13990-1 knitting machines Textile machinery and accessories - Yarn feeders and yarn control devices - Part 1. Terminology (Textile machineryandaccessories-Yarnfeedersandyarncontrolforknittingmachines-Part 1. Vocabulary) ISO 13990-3 Textile machinery and accessories for knitting machines - Part 3 - Yarn feeders and yarn control devices. electrical connection cable and the Internet Cable size (Textilemachineryandaccessories-Yarnfeedersandyarncontrolforknittingmachines-Part 3. Dimensionsforconnectingandinterconnectioncables)

3 Terms and Definitions

ISO 13990-1 defined terms and definitions apply to this document.

4 Associative dimensions