GB/T 19290.2-2003Modular order for the development of mechanical structures for electronic equipment practices -- Part 2: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice (English PDF)
发展中的电子设备构体机械结构模数序列 第2部分：分规范 25mm设备构体的接口协调尺寸
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19290.2-2003 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China
Level / Type
National · Recommended
Issue date
September 15, 2003
Implementation date
May 1, 2004
Scope
GB/T 19290.2-2003 is the English-translated version of 发展中的电子设备构体机械结构模数序列 第2部分：分规范 25mm设备构体的接口协调尺寸.
GB/T 19290.2-2003 — This standard applies to: All modulus sequences designed using the electronic field equipment and installations.
This standard is 2, mm mechanical structures to determine equipment specification, to provide relevant engineering applications (such as plug-in, PCB, components, instruments, equipment, rooms, buildings, etc.) mechanical interface size compatibility.
This standard applies to: all types of electronic devices (such as industrial electronics, information technology, measurement and control systems in communications, etc.) all cabinets, racks, subracks and chassis Coordination size and grid spacing.
Mechanical structure height, width and depth Coordination size is based on GB/T 19290, 1 requirements the same metric modulus a three-dimensional mesh selected -.
This standard with 2, mm and 2, . Mm grid spacing as the installation of electronic equipment to determine the configuration of the interface coordination body size foundation.
This is a computer aided design and manufacture vehicles (such as computer pumping aid planning, development, manufacturing, testing and installation, etc.) to create the best conditions for the application.
Found what you need?
Document preview — GB/T 19290.2-2003
National Standard of the People's Republic of China
- ICS
- 31.240
- Classification
- L 94
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China
Contents
- What this standard covers1
- Document data2
What this standard covers
This standard applies to: All modulus sequences designed using the electronic field equipment and installations. This standard is 2, mm mechanical structures to determine equipment specification, to provide relevant engineering applications (such as plug-in, PCB, components, instruments, equipment, rooms, buildings, etc.) mechanical interface size compatibility. This standard applies to: all types of electronic devices (such as industrial electronics, information technology, measurement and control systems in communications, etc.) all cabinets, racks, subracks and chassis Coordination size and grid spacing. Mechanical structure height, width and depth Coordination size is based on GB/T 19290, 1 requirements the same metric modulus a three-dimensional mesh selected -. This standard with 2, mm and 2, . Mm grid spacing as the installation of electronic equipment to determine the configuration of the interface coordination body size foundation. This is a computer aided design and manufacture vehicles (such as computer pumping aid planning, development, manufacturing, testing and installation, etc.) to create the best conditions for the application. This standard specifies
Document data
International classification (ICS): 31.240.
Chinese classification (CCS): L94.
Estimated length of the Chinese original: 12,190 words.
Adopted international standard: IEC 60917-2-1992; IDT.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 19183.2-2024Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
- GB/T 19290.4-2009Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-2: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for sub-rack, c
- GB/T 19290.3-2008Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an
How to Download GB/T 19290.2-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19290.1-2003 — Modular order for the development of mechanical structures for electronic equipment practices -- Part 1: Generic standard
GB/T 19290.3-2008 — Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an
GB/T 19290.4-2009 — Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-2: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for sub-rack, c
Secure payment via Stripe
Payments accepted
GB/T 19290.2-2003
$299.00