Valid

GB/T 1927.1-2021Test methods for physical and mechanical properties of small clear wood specimens - Part 1: Collection of sample tree (English PDF)

无疵小试样木材物理力学性质试验方法 第1部分:试材采集

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 1927.1-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 1927.1-2021 is the English-translated version of 无疵小试样木材物理力学性质试验方法 第1部分:试材采集.

GB/T 1927.1-2021 is the Chinese standard "Test methods for physical and mechanical properties of small clear wood specimens - Part 1: Collection of sample tree".

Its scope clause reads: This document describes the test method for the physical and mechanical properties of wood with small samples without defects: material interception and recording, as well as test material numbering and transportation: This document is applicable to the collection of test materials for the study of wood physical and mechanical properties of standing trees of the same type:. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 1927.1-2021

National Standard of the People's Republic of China

Classification
B 68

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

1 Scope

This document describes the test method for the physical and mechanical properties of wood with small samples without defects:

material interception and recording, as well as test material numbering and transportation:

This document is applicable to the collection of test materials for the study of wood physical and mechanical properties of standing trees of the same type:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

GB/T 1927:2 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2: Sampling methods and general requirements (GB/T 1927:2-2021, ISO 3129:2019, MOD)

GB/T 1927:4 Test methods for physical and mechanical properties of wood with small flawless specimens - Part 4: Determination of moisture content (GB/T 1927:4-

2021, ISO 13061-1:2014, MOD)

GB/T 26423-2010 Forest Resource Terminology

LY/T 1788 Terms for wood properties

3 Terms and Definitions

The terms and definitions defined in GB/T 26423-2010 and LY/T 1788 and the following terms and definitions apply to this document:

3:1 homogeneousstand

A forest area that has the same internal forestry characteristics and is significantly different from the surrounding areas:

3:2 canopy density crowndensity; shadedensity

The ratio of the vertical projected area of the canopy to the woodland area:

Note: expressed in tenths:

[Source: GB/T 26423-2010, 6:42, with modifications]

3:3 root neck rootcolar

The part of a standing tree that is transformed from a root to a stem:

3:4 diameter at breast height; DBH The diameter of the trunk above the ground surface at breast height:

Note: Generally, the height of the chest is set as the height of 1:3m above the root neck:

GB/T 18107 | LY/T 2407 | LY/T 1184 | GB/T 1927.4 | GB/T 1927.3 | GB/T 1927.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 1927.1-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 1927.1-2021

$150.00