GB/T 19212.3-2026Safety of transformers, reactors, power supply units and combinations thereof - Part 3: Particular requirements and tests for control transformers and power supply units incorporating control transformers (English PDF)
变压器、电抗器、电源装置及其组合的安全 第3部分:控制变压器和内装控制变压器的电源装置的特殊要求和试验
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 19212.3-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
April 1, 2027
Scope
GB/T 19212.3-2026 is the English-translated version of 变压器、电抗器、电源装置及其组合的安全 第3部分:控制变压器和内装控制变压器的电源装置的特殊要求和试验.
GB/T 19212.3-2026 is the Chinese national standard "Safety of transformers, reactors, power supply units and combinations thereof - Part 3: Particular requirements and tests for control transformers and power supply units incorporating control transformers".
It was issued on September 28, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on April 1, 2027. It is a current standard and replaces GB 19212.3-2012.
Found what you need?
Document preview — GB/T 19212.3-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 19212.3-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 September 2026 and takes effect on 1 April 2027.
It replaces the earlier edition GB/T 19212.3-2012.
It is one of 28 parts of the GB/T 19212 series.
2 Scope Preview
GB/T 19212.3-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 19212.1-2016 — Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
GB/T 19212.1-2023 — Part 1: General requirements and tests
GB/T 19212.2-2012 — Safety of power transformers, power supplies, reactors and similar products - Part 2: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.2-2025 — Part 2: Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications
GB/T 19212.4-2016 — Part 4: Particular requirements and tests for ignition transformers for gas and oil burners
GB/T 19212.5-2011 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 5: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
GB/T 19212.5-2025 — Part 5: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
GB/T 19212.6-2013 — [GB/T 19212.6-2013] Safety of transformers, reactors, power supply units and combinations thereof -- Part 6: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units
GB/T 19212.7-2012 — [GB/T 19212.7-2012] Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 7: Particular requirements and test for safety isolating transformers and power supply units incorporating safety isola
GB/T 19212.7-2026 — Part 7: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications
GB/T 19212.8-2012 — [GB/T 19212.8-2012] Safety of power transformers, power supplies, reactors and similar products -- Part 8: Particular requirements and tests for transformers and power supplies for toys
GB/T 19212.9-2016 — Part 9: Particular requirements and tests for transformers and power supply units for bells and chimes
GB/T 19212.11-2020 — Part 11: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
GB/T 19212.13-2005 — Safety of power transformers, power supply units and similar - Part 13: Particular requirements for constant voltage transformers
GB/T 19212.13-2019 — Safety of transformers, reactors, power supply units and combination thereof -- Part 13: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
GB/T 19212.14-2012 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100V - Part 14: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers
GB/T 19212.14-2025 — Part 14: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications
GB/T 19212.15-2016 — Part 15: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
GB/T 19212.16-2005 — Safety of power transformers, power supply units and similar - Part 16: Particular requirements for isolating transformers for the supply of medical locations
GB/T 19212.16-2017 — Part 16: Particular requirements and tests for isolating transformers for the supply of medical locations
GB/T 19212.17-2013 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100V - Part 17: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
GB/T 19212.17-2019 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 17: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
GB/T 19212.17-2026 — Part 17: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications
GB/T 19212.20-2008 — Safety of power transformers, power supply units and similar -- Part 20: Particular requirements for perturbation attenuation transformers
GB/T 19212.24-2005 — Safety of power transformers, power supply units and similar - Part 24: Particular requirements for transformers for construction sites
GB/T 19212.24-2020 — Part 24: Particular requirements and test for transformers and power supply units for construction sites
GB/T 19212.27-2017 — Part 27: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes
Other editions:
GB/T 19212.3-2012 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Editions of GB/T 19212.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 19212.3-2026 | Safety of transformers, reactors, power supply units and combinations thereof - Part 3: Particular requirements and tests for control transformers and power supply units incorporating control transformers | — | Valid |
| GB 19212.3-2012 | [GB/T 19212.3-2012] Safety of power transformers, power supplies, reactors and similar products - Part 3: Particular requirements and tests for control transformers and power supplies incorporating control transformers | — | Obsolete |
| GB 19212.3-2006 | Safety of power transformers, power supply units and similar - Part 3: Particular requirements for control transformers | — | Obsolete |
This page sells the current edition, GB/T 19212.3-2026. Earlier editions are listed for reference only.
How to Download GB/T 19212.3-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19212.4-2016 — Safety of transformers, reactors, power supply units and combinations thereof -- Part 4: Particular requirements and tests for ignition transformers for gas and oil burners
GB/T 19212.2-2012 — Safety of power transformers, power supplies, reactors and similar products - Part 2: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.5-2025 — Safety of transformers, reactors, power supply units and combinations thereof - Part 5: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
GB/T 19212.3-2026
$255.00