GB/T 19211-2015Cargo/vehicle radiographic inspection system (English PDF)
辐射型货物和(或)车辆检查系统
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19211-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 3, 2015
Implementation date
February 1, 2016
Scope
GB/T 19211-2015 is the English-translated version of 辐射型货物和(或)车辆检查系统.
GB/T 19211-2015 is the Chinese standard "Cargo/vehicle radiographic inspection system". Its scope clause reads: This standard specifies the composition of the radiation type of goods and (or) vehicle inspection system, classification, technical requirements, test methods, inspection rules and packaging Transportation and so on.
This standard applies to the radiation type of goods and (or) vehicle inspection system, gamma-rays or X-ray energy which is equipped with more than 500keV. This standard does not apply to the use of a neutron source radiation checks, computer tomography (CT) or backscatter technology goods and (or) vehicle inspection system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 19211-2015
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- F 84
- Replacing
- GB 19211-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 system components and product classifications
- 4.1 System components
- 4.2 System Function
- 4.3 Categories
- 5 General characteristics
- 5.1 Structure and appearance
- 5.2 Emergency stop device
- 5.3 safety interlock device
- 5.4 Status Indicator
- 5.5 Monitoring System
- 6 5 General test methods
- 6.1 Reference conditions and standard test conditions
- 6.2 test equipment
- 6.3 Performance Test
- 6.4 Structure and Visual inspection
- 6.5 Emergency stop device
- 6.6 safety interlock
- 6.7 Status Indicator
- 6.8 Monitoring System
- 7.1 Requirements
- 7.2 Test Method
- 8 7 imaging performance test
- 8.1 penetration
- 8.2 Resolution 8 wire
- 8.4 Spatial Resolution
- 8.5 substance Resolution
- 9 radiation safety test
- 9.1 Overview
- 9.2 ambient dose equivalent dose rate curve
- 9.4 the driver's seat through a single ambient dose equivalent
- 9.5 were seized by a single ambient dose equivalent
- 10 Electrical Safety
- 10.1 grounding protection device
- 10.2 Insulation resistance
- 10.3 Dielectric strength
- 10.4 anti-shock
- 11 16 Electromagnetic Compatibility
- 11.1 Requirements
- 11.2 Test Method
- 12 environmental requirements
- 12.1 Requirements
- 12.2 Test Method
- 13 16 Inspection Rules
- 16 13.1 Inspection classification
- 13.2 17 test items
- 13.3 Inspection
- 13.4 determine the rules
- 14 signs, packaging, transportation and storage
- 14.1 mark
- 14.2 Packaging
- 14.3 Transport
- 14.4 Storage
- 15 accompanying documents
- References
- 1 penetration test schematic in Figure
1 Scope
This standard specifies the composition of the radiation type of goods and (or) vehicle inspection system, classification, technical requirements, test methods, inspection rules and packaging
Transportation and so on.
This standard applies to the radiation type of goods and (or) vehicle inspection system, gamma-rays or X-ray energy which is equipped with more than 500keV.
This standard does not apply to the use of a neutron source radiation checks, computer tomography (CT) or backscatter technology goods and (or) vehicle inspection system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 699-1999 quality carbon structural steel
GB/T 4960.6-2008 nuclear science and technology - Part 6. Nuclear instrumentation
GB 5172 particle accelerator radiation protection
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 6543 transport packaging corrugated box with a single and double corrugated boxes
GB 11806-2004 safe transport of radioactive materials regulations
GB/T 12464 ordinary wooden box
GB/T 17799.1-1999 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environment - Immunity
GB 17799.3-2012 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environments Emission standard
GB 18871-2002 ionizing radiation protection and safety of radiation sources basic standards
Radiological protection requirements GB Z143 cargo/vehicle inspection system radiation
3 Terms and Definitions
GB/T 4960.6-2008 defined and the following terms and definitions apply to this document.
3.1 Transmission image
X-rays or gamma-rays passing through the object to be inspected, because the degree of attenuation of the projected image caused by the difference.
3.2
The use of X or gamma radiation source and the radiation detector to obtain goods and (or) vehicle image transmission system.
3.3 X-ray Inspection System
The use of X-ray generator or accelerator bremsstrahlung as a radiation source for acquiring an image inspection system.
3.4
gamma-ray inspection system gamma-rayinspectionsystem
Use gamma radionuclide sources as a radiation source for acquiring an image inspection system.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 19211
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 19211-2015 | Cargo/vehicle radiographic inspection system | current edition | Current |
| GB 19211-2003 | Cargo/vehicle radiographic inspection system | previous edition | Superseded |
This page sells the current edition, GB/T 19211-2015. Earlier editions are listed for reference only.
How to Download GB/T 19211-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 19211-2015
$355.00