Valid

GB/T 18501.8102-2026Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A (English PDF)

电子和电气设备用连接器 产品要求 第8-102部分:电源连接器 2芯、3芯150 A功率加2芯信号塑料外壳屏蔽密封连接器详细规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 18501.8102-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 28, 2026

Implementation date

January 1, 2027

Scope

GB/T 18501.8102-2026 is the English-translated version of 电子和电气设备用连接器 产品要求 第8-102部分:电源连接器 2芯、3芯150 A功率加2芯信号塑料外壳屏蔽密封连接器详细规范.

GB/T 18501.8102-2026 is the Chinese standard "Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A". Issued on 2026-09-28, in force from 2027-01-01.

Found what you need?

Document preview — GB/T 18501.8102-2026

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 18501.8102-2026 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 28 September 2026.

It is one of 9 parts of the GB/T 18501 series.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 18501.8102-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 75,626 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

GB/T 18501.1-2001 — Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 1: Generic specification

GB/T 18501.2-2001 — Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 2: Circular connectors with assessed quality -- Sectional specification

GB/T 18501.8100-2025 — Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A

GB/T 18501.8101-2025 — Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A

GB/T 18501.8105-2026 — Part 8-105: Power connectors - Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for 63A rated current and 400V rated voltage

GB/T 18501.8107-2026 — Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when

GB/T 18501.8108-2026 — Part 8-108: Power connectors - Detail specification for 2P 250 A,1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

GB/T 18501.8109-2026 — Connectors for electrical and electronic equipment—Product requirements—Part 8-109: Power connectors—Detail specification for 2P 130 A, 1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download GB/T 18501.8102-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18501.8102-2026

$375.00