Valid

GB/T 18311.2-2026Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-2: Examination and measurements—Polarization dependent loss in a single-mode fibre optic device (English PDF)

纤维光学互连器件和无源器件 基本试验和测量程序 第3-2部分:检查和测量 单模纤维光学器件偏振相关损耗

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 18311.2-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

February 1, 2027

Scope

GB/T 18311.2-2026 is the English-translated version of 纤维光学互连器件和无源器件 基本试验和测量程序 第3-2部分:检查和测量 单模纤维光学器件偏振相关损耗.

GB/T 18311.2-2026 is the Chinese national standard "Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-2: Examination and measurements—Polarization dependent loss in a single-mode fibre optic device".

It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on February 1, 2027. It is a current standard and replaces GB/T 18311.2-2001.

Found what you need?

Document preview — GB/T 18311.2-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 18311.2-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 February 2027.

It replaces the earlier edition GB/T 18311.2-2001.

It is one of 19 parts of the GB/T 18311 series.

2 Scope Preview

GB/T 18311.2-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 18311.1-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-1: Examinations and measurements -- Visual examination

GB/T 18311.1-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-1:Examinations and measurements—Visual examination

GB/T 18311.3-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-3: Examinations and measurements -- Monitoring change in attenuation and in return loss (multiple paths)

GB/T 18311.4-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-4: Examinations and measurements -- Attenuation

GB/T 18311.5-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-5: Examinations and measurements -- Wavelength dependence of attenuation

GB/T 18311.6-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-6: Examinations and measurements -- Return loss

GB/T 18311.16-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-16: Examinations and measurements -- End face radius of spherically polished ferrules

GB/T 18311.20-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fibre optic branching devices

GB/T 18311.25-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-25: Examinations and measurements—Concentricity of non-angled ferrules and non-angled ferrules with fibre installed

GB/T 18311.26-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-26: Examinations and measurements -- Measurement of the angular misalignment between fibre and ferrule axes

GB/T 18311.28-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-28: Examinations and measurements -- Transient loss

GB/T 18311.28-2026 — Fiber optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-28:Examinations and measurements—Transient loss

GB/T 18311.30-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-30: Examinations and measurements -- Polish angle and fibre position on single ferrule multi-fibre connectors

GB/T 18311.31-2007 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources

GB/T 18311.34-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-34: Examinations and measurements -- Attenuation of random mated connectors

GB/T 18311.40-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-40: Examinations and measurements -- Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector

GB/T 18311.47-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry

GB/T 18311.55-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components

Other editions:

GB/T 18311.2-2001 (earlier edition)

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Editions of GB/T 18311.2

EditionTitleRevisionStatus
GB/T 18311.2-2026Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-2: Examination and measurements—Polarization dependent loss in a single-mode fibre optic device—Valid from 2027-02-01
GB/T 18311.2-2001Fibre optic interconnecting devices and passive component - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of a single-mode fibre optic device—Valid until 2027-02-01

This page sells the current edition, GB/T 18311.2-2026. Earlier editions are listed for reference only.

How to Download GB/T 18311.2-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18311.2-2026

$255.00