Valid

GB/T 18310.4-2026Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-4: Tests—Fibre or cable retention (English PDF)

纤维光学互连器件和无源器件 基本试验和测量程序 第2-4部分:试验 光纤/光缆保持力

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 18310.4-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

May 1, 2027

Scope

GB/T 18310.4-2026 is the English-translated version of 纤维光学互连器件和无源器件 基本试验和测量程序 第2-4部分:试验 光纤/光缆保持力.

GB/T 18310.4-2026 is the Chinese national standard "Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-4: Tests—Fibre or cable retention".

It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard and replaces GB/T 18310.4-2001.

Found what you need?

Document preview — GB/T 18310.4-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 18310.4-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.

It replaces the earlier edition GB/T 18310.4-2001.

It is one of 36 parts of the GB/T 18310 series.

2 Scope Preview

GB/T 18310.4-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 18310.1-2002 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-1: Test -- Vibration (sinusoidal)

GB/T 18310.2-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-2: Tests -- Mating durability

GB/T 18310.3-2001 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-3: Tests - Static shear load

GB/T 18310.5-2002 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-5: Tests -- Torsion/twist

GB/T 18310.6-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-6: Tests -- Tensile strength of coupling mechanism

GB/T 18310.7-2002 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - moment

GB/T 18310.7-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment

GB/T 18310.8-2003 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-8: Testing collision

GB/T 18310.9-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-9: Tests -- Shock

GB/T 18310.10-2003 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Testing anti-extrusion

GB/T 18310.10-2026 — Fiber optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush and load resistance

GB/T 18310.11-2003 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests axial compression

GB/T 18310.11-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression

GB/T 18310.12-2002 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-12: Tests -- Impact

GB/T 18310.12-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-12: Tests—Impact

GB/T 18310.14-2003 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Maximum input power

GB/T 18310.14-2025 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power

GB/T 18310.17-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-17: Tests -- Cold

GB/T 18310.17-2026 — Fiber optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-17: Tests—Cold

GB/T 18310.18-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-18: Tests -- Dry heat -- High temperature endurance

GB/T 18310.19-2002 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-19: Tests -- Damp heat (steady state)

GB/T 18310.21-2002 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-21: Tests -- Composite temperature-humidity cyclic test

GB/T 18310.22-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-22: Tests -- Change of temperature

GB/T 18310.23-2025 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices

GB/T 18310.26-2003 — Fibre optic interconnecting devices and passive components Basic test and measurement procedures -- Part 2-26: Tests -- Salt mist

GB/T 18310.27-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow)

GB/T 18310.28-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide)

GB/T 18310.29-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure

GB/T 18310.35-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation

GB/T 18310.39-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-39: Tests -- Susceptibility to external magnetic fields

GB/T 18310.42-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-42: Test -- Static side load for connectors

GB/T 18310.42-2026 — Fiber optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-42: Tests—Static side load for strain relief

GB/T 18310.45-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-45: Tests -- Durability test by water immersion

GB/T 18310.46-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-46: Test—Damp heat cycle

GB/T 18310.48-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-48: Tests -- Temperature-humidity cycling

Other editions:

GB/T 18310.4-2001 (earlier edition)

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Editions of GB/T 18310.4

EditionTitleRevisionStatus
GB/T 18310.4-2026Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-4: Tests—Fibre or cable retention—Valid from 2027-05-01
GB/T 18310.4-2001Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention—Valid until 2027-05-01

This page sells the current edition, GB/T 18310.4-2026. Earlier editions are listed for reference only.

How to Download GB/T 18310.4-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18310.4-2026

$255.00