GB/T 17739-1999Microfilming of technical drawings and other drawing office documents -- Part 1: Operating procedures (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17739-1999 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
July 16, 2008
Implementation date
January 1, 2009
Scope
GB/T 17739-1999 (Microfilming of technical drawings and other drawing office documents -- Part 1: Operating procedures) is available as an English-translated PDF.
GB/T 17739-1999 — This section GB/T 17739 specifies the shooting, such as technical drawings and architectural plans on 35mm film nonporous, calculation records, technology Reduction ratio requires surgery, symbol sets single parts and other technical documents, magnify the size, and thus the resulting image size.
This section applies to microfilm with dark lines and characters on a light background, file sizes up to A0 originals should comply ISO 5457:1999 and GB/T 10609.4 requirements.
This section also applies to ISO 5457:1999 other than those specified, as long as the format does not exceed Over 912mm × 1230mm, and according to the provisions of this section can be accommodated in a single frame of 35mm microfilm files of other sizes Microfilm. This section does not apply to the image produced by the device COM.
Found what you need?
Document preview — GB/T 17739-1999
National Standard of the People's Republic of China
- ICS
- 37.080
- Classification
- A 14
- Replacing
- GB/T 15021-1994
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Green sheet
- 5 Original
- 5.1 Dimensions
Foreword
GB/T 17739 "technical drawings and technical documents microfilming" is divided into six parts.
--- Part 1. Operating procedures;
Part --- Article 2. 35mm silver - gelatin microforms quality standards and testing;
Part --- Section 3. 35mm microfilm aperture cards;
--- Part 4. Special and oversized pattern shooting;
--- Part 5. microfilm images in aperture cards diazo copy testing procedures;
--- Part 6. Quality criteria and control of systems for enlargements from 35mm microfilm.
This section GB/T 17739 Part 1, identical with ISO 3272-1:2003 shrink "technical drawings and other drawing office documents Micro photography - Part 1. Operating Procedures "(in English).
This part of ISO 3272-1:2003 compared to the main editorial changes made the following.
--- Figure 1 t label position change (ISO 3272-1:2003 marked incorrect);
--- Part Normative references to the corresponding national standards;
--- "International standards in this section" to "this Part";
--- Delete international standards preface;
--- With a decimal point "." Instead of a comma as the decimal point "." this Part replaces GB/T 15021-1994 "Micrographics shoot technical drawings and technical documents with 35mm roll film Regulations set".
Section compared with the GB/T 15021-1994 The main changes are as follows.
--- The standard number to GB/T 17739.1, standard names also made corresponding changes, and in accordance with sub-section of the standard text representation of parties Method statements for unified text, keeping GB/T 17739 standard of integrity;
--- Increase the "green sheet 4" chapter;
--- The original "7 quality requirements" delete, add "7 enlarged." this section of Appendix A normative appendix.
This part of the National Document Imaging Technology Standardization Technical Committee (SAC/TC86) and focal points.
This section drafted by. National Information Technology Standardization Technical Committee Document Imaging six Branch, National Archives files Institute of Science and Technology.
1 Scope
This section GB/T 17739 specifies the shooting, such as technical drawings and architectural plans on 35mm film nonporous, calculation records, technology Reduction ratio requires surgery, symbol sets single parts and other technical documents, magnify the size, and thus the resulting image size.
This section applies to microfilm with dark lines and characters on a light background, file sizes up to A0 originals should comply ISO 5457:1999 and GB/T 10609.4 requirements. This section also applies to ISO 5457:1999 other than those specified, as long as the format does not exceed Over 912mm × 1230mm, and according to the provisions of this section can be accommodated in a single frame of 35mm microfilm files of other sizes Microfilm.
This section does not apply to the image produced by the device COM.
2 Normative references
The following documents contain provisions cited by the present part of GB/T 17739, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) and revised versions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these texts. For undated reference documents, the latest versions apply to this section.
GB/T 6159.1-2003 Micrographics - Vocabulary - Part 1. General terms (ISO 6196-1:1993, MOD) GB/T 6159.3-2003 Micrographics - Vocabulary - Part 3. film processing (ISO 6196-3:1997, MOD) GB/T 6159.7-2000 Micrographics - Vocabulary Part VII. Computer Micrographics (eqv ISO 6196-7.
1992)
GB/T 6159.22-2000 Micrographics - Vocabulary Part II. and methods of recording images (eqv ISO 6196-2.
1993)
GB/T 10609.4 Technical drawings on microfilm copy of the original request (GB/T 10609.4-1989, neq ISO 6428. 1982) ISO 5457:1999 Technical product documentation dimensions and layout drawings ISO 6148:2001 Micrographics photography film, anti-ray disc and the disc core size
3 Terms and Definitions
GB/T 6159.1-2003, terms and definitions GB/T 6159.3-2003 and GB/T 6159.22-2000 given apply this section.
4 Green sheet
Green sheet shall comply with ISO 6148. 35mm nonporous film 2001 regulations.
5 Original
5.1 Dimensions
We recommend the use of 5457 ISO . Original 1999 A series of predetermined size.
Note. This section does not include a variety of file sizes larger than 912mm × 1230mm; and is larger than the size of the files belonging to GB/T 17739.4-2008 of range.
GB/T 17739.1-2008/ISO 3272-1:2003
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17739Microfilming of technical drawings and other drawing office documents -- Part 1: Operating procedures
- GB/T 6159.1-2003Micrographics -- Vocabulary -- Part 1: General terms
- GB/T 6159.3-2003Micrographics -- Vocabulary -- Part 3: Film processing
- GB/T 6159.7-2000Micrographics -- Vocabulary -- Part 7: Computer micrographics
- GB/T 10609.4Technical drawings -- Requirements for micro-copying
- GB/T 10609.4-1989Technical drawings -- Requirements for micro-copying
ISO 6196 · GB/T 6159.22-2000 · ISO 6428 · ISO 5457 · ISO 6148
How to Download GB/T 17739-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10609.4-2009 — Technical drawings -- Requirements for micro-copying
GB/T 17739.1-2008 — Microfilming of technical drawings and other drawing office documents -- Part 1: Operating procedures
GB/T 17739.2-2021 — Microfilming of technical drawings and other drawing office documents - Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
Secure payment via Stripe
Payments accepted
GB/T 17739-1999
$149.00