Valid

GB/T 17524-1998Inspection regulation for micro-hydro generator equipments (English PDF)

微型水力发电设备质量检验规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17524-1998 in 30 minutes.

Issued by

State Quality and Technical Supervision

Level / Type

National · Recommended

Issue date

October 29, 1998

Implementation date

August 1, 1999

Scope

GB/T 17524-1998 is the English-translated version of 微型水力发电设备质量检验规程.

GB/T 17524-1998 is the Chinese standard "Inspection regulation for micro-hydro generator equipments". This standard specifies the rated power of 10 kW and below, single, three-phase micro-hydro power equipment (hereinafter referred to as micro-hydro) product sampling, quality inspection and test results to determine.

This standard applies to the power of 10 kW and below, 230V single-phase or three-phase 400V, frequency 50 (60) Hz asynchronous or synchronous generator, turbine and controller ready or micro hydro-packing machine Product Quality inspection and result determination.

Mechanical speed type 10 kW and below the product implementation. It was issued by State Quality and Technical Supervision. Issued on 10/29/1998, in force from 8/1/1999.

Found what you need?

Document preview — GB/T 17524-1998

National Standard of the People's Republic of China

ICS: 27.14
Classification: P59

Issued by: State Quality and Technical Supervision

[Preview only]
1 Scope
2 Normative references
3 Terms and Definitions
3.1 General Requirements
3.2 Construction Survey
3.3 Construction Planning
4.2 Construction Traffic
4.3 Structure, Materials and Equipment Transportation
4.4 Configuration of distributed resources
4.5 Grid structure and layout design
5 Neutron Fluence Rate Measurement
5.2 Neutron Detector
5.3 Neutron Fluence Rate Measuring Instrument
5.4 Neutron Fluence Rate Level-Related Alarms, Controls, and Shutdowns
5.5 Calibration and testing of neutron fluence rate measuring instruments
6 Temperature measurement
6.2 Fuel assembly temperature measurement
6.3 Moderator Temperature Measurement
6.4 Coolant temperature measurement
6.5 Temperature Measurements Important to Reactor Safety
6.6 Temperature protection instrument
6.7 Monitoring program
6.8 Environmental monitoring program
6.9 Emergency environmental monitoring
7 Coolant Measurement
7.2 Coolant flow measurement
7.3 Coolant pressure measurement
7.4 Coolant level measurement
7.5 Coolant Leakage Measurement
7.6 Coolant Purity Measurement
7.7 Coolant radioactivity measurement
8 Protection system
8.1 Introduction
8.2 Input-output diagram
8.3 Comprehensive Assessment of Energy-saving Design
9 Instrument power source
9.2 Reliable power system
9.3 Trial Run of Wind Turbine Generator System
9.4 Testing of Transformer

1 Foreword

GB/T 17524-1998 was issued by State Quality and Technical Supervision on 29 October 1998 and has been in force since 1 August 1999.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 8 pages in English translation.

2 Scope Preview

This standard specifies the rated power of 10 kW and below, single, three-phase micro-hydro power equipment (hereinafter referred to as micro-hydro) product sampling, quality inspection and test results to determine. This standard applies to the power of 10 kW and below, 230V single-phase or three-phase 400V, frequency 50 (60) Hz asynchronous or synchronous generator, turbine and controller ready or micro hydro-packing machine Product Quality inspection and result determination. Mechanical speed type 10 kW and below the product implementation.

GB/T 17524-1998 falls under ICS 27.14, in the field of energy and heat transfer engineering.

This catalogue holds 1,532 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 About this standard

Sector: National Standard (Recommended)

Issued by: State Quality and Technical Supervision

English translation: about 8 pages (approximate)

Chinese original: about 6,623 characters

4 Related standards

Standards on related subjects:

GB/T 16311-2024 — Specification and test method for road traffic markings

NB 35047-2015 — Code for seismic design of hydraulic structures of hydropower projects

GB 50788-2012 — Technical code for water supply and sewerage of urban

GB/T 45530-2025 — Technical specification for earth-rockfill dam safety monitoring

GB/T 22385-2025 — Specification for acceptance of dam safety monitoring system

GB/T 44273-2024 — Specification for operation and management of hydropower projects

5 Classification and status

International classification (ICS): 27.14

Chinese Standard Classification (CCS): P 59

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

Cited by

NY/T 665-2003Identification criterions for micro hydraulic generator equipment

How to Download GB/T 17524-1998

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.