Valid

GB/T 17430-2015Estimating the maximum service temperature of thermal insulation (English PDF)

绝热材料最高使用温度的评估方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17430-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 11, 2015

Implementation date

August 1, 2016

Scope

GB/T 17430-2015 is the English-translated version of 绝热材料最高使用温度的评估方法.

GB/T 17430-2015 is the Chinese standard "Estimating the maximum service temperature of thermal insulation". Its scope clause reads: This standard applies to loose fill insulation materials, carpets, blankets, blocks, plates and prefabricated pipe insulation and other insulation products maximum temperature commentary estimate.

Select the project and its performance criteria for judging the performance of the use of state (or after use) products is the basis for assessing the maximum use temperature.

Performance of the project and the criteria defined by the insulation standards. This standard is not intended to relate with all product safety issues. This method is intended to guide the assessment of insulation material properties at high temperatures Changes, and determine the applicability of the material under specific application conditions.

This method is generally not used for batch tests or qualification tests and acceptance. Its clauses include terms and definitions; method summary and application notes.

Found what you need?

Document preview — GB/T 17430-2015

National Standard of the People's Republic of China

ICS: 91.120.10
Classification: Q 25
Replacing: GB/T 17430-1998

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Terms and Definitions
4 Method summary and application notes

1 Scope

This standard applies to loose fill insulation materials, carpets, blankets, blocks, plates and prefabricated pipe insulation and other insulation products maximum temperature commentary estimate. Select the project and its performance criteria for judging the performance of the use of state (or after use) products is the basis for assessing the maximum use temperature.

Performance of the project and the criteria defined by the insulation standards.

This standard is not intended to relate with all product safety issues. This method is intended to guide the assessment of insulation material properties at high temperatures

Changes, and determine the applicability of the material under specific application conditions. This method is generally not used for batch tests or qualification tests and acceptance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 4132 insulation materials and related terms

GB/T 5480 Test methods for mineral wool and its products

GB/T 5486 inorganic rigid thermal insulation - Test methods

GB/T 6342 Determination of linear dimensions of foam rubber

GB/T 6343 and foam rubber Determination of apparent density

GB/T 8813 rigid foam compression test method

GB/T 10294 insulation steady thermal resistance and related properties - Guarded hot plate method

GB/T 10295 insulation steady thermal resistance and related properties - Heat flow meter method

Determination of GB/T 10296 insulation steady heat transfer properties - Pipe

Performance test method GB/T 13480 compression of mineral wool products

3 Terms and Definitions

GB/T 4132 defined by the following terms and definitions apply to this document.

3.1 Thermal performance test surface

Simulate the actual use of material, the material is hot face temperature, cold room temperature (below 90 °C), and the hot face in a horizontal position

Under experienced a certain time, observation and determination of properties of materials.

4 Method summary and application notes

4.1 Method summary

4.1.1

Prior to the measurement sample surface thermal performance test, during and after the size, quality and other relevant characteristics.

4.1.2

report sample surface thermal performance test period, after which the characteristics and temperature changes, determine the highest temperature insulating material.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 47072-2026|GB/T 5486-2026|GB/T 20974-2025|GB/T 23932-2025|GB/T 30595-2024|GB/T 16400-2023

Editions of GB/T 17430

Edition	Title	Revision	Status
GB/T 17430-2015	Estimating the maximum service temperature of thermal insulation	current edition	Current
GB/T 17430-1998	Estimating the maximum service temperature of thermal insulation	previous edition	Superseded

This page sells the current edition, GB/T 17430-2015. Earlier editions are listed for reference only.

How to Download GB/T 17430-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.