GB/T 17306-2008Packaging -- Addressing consumer needs (English PDF)

Foreword

This standard is identical with ISO/IEC Guide 41.2003 "Packaging consumer demand" (in English).

This standard replaces GB/T 17306-1998 "packaging standard consumer demand." this standard 17306-1998 major changes compared to GB/T as follows.

--- Standard name from the original "packaging standards consumer demand" to "packaging consumer demand";

--- Chapter 1 Scope, increasing the purpose of standards development; according to GB 5296.1-1997 "General consumer use" Edit the definition of "consumer goods" in;

--- Chapter 2 of the title "Human and Environmental Security" to "safe packaging materials and people and the environment"; 2.1, delete the portion of the inner Yung; 2.2, 2.2.1 modify parts, increased "d) to prevent children from contact packaging should refer to the provisions of ISO 8317";

2.3, delete 2.3.3;

--- The title of Chapter 3, "applicability" to "practicality" will adjust the original content of 3.2 to 3.3, and made changes; increased 3.2 Security is enabled; to adjust the content of 3.3 to 3.4, and the title changed to "packaging" and "packaging size and shape so that the consumer should not be by misunderstanding of its contents "with the words" packaging size and shape should be consistent with the contents content, consumers should not be produced any misunderstanding ";

--- Chapter 4, an increase of 4.1 General;

--- Added "References." this standard by the National Standardization Technical Committee and centralized services.

This standard drafting units. China National Institute of Standardization, Beijing Institute of Light Industry.

Introduction

Packaging consumers are concerned, the indirect costs borne by consumers. Therefore, standardized packaging should emphasize safety, health, comfort, convenience, Reliability and other factors, as well as other aspects of environmental protection and resource conservation needs.

This standard aims to provide guidelines to the following organizations, staff.

--- To meet consumer packaging requirements and the development of standards individual or organization;

--- The Committee to develop a product or service standards;

--- Product designers, producers and other packaging-related personnel;

--- Other supervisory and administrative organizations.

Providing a good product packaging, helping suppliers get a better reputation, reduce consumer spending on inquiries and complaints Time and costs.

GB/T 17306-2008/ISO/IEC GUIDE41.2003 Packaging consumer demand

1 Scope

This standard specifies the basic principles and requirements for the packaging of consumer goods to meet consumer demand should follow.

This standard applies to consumer packaging and related standards.

This standard is aimed at the following ways to enable consumers to benefit as much as possible.

--- Removal of unnecessary packaging to reduce product prices, reduce waste due to unnecessary packaging generated;

--- To ensure that consumers get the product in good condition;

--- To protect consumers from potential damage to the packaging or contents arising;

--- So that consumers can properly store the product properly stored, processed, or recycled packaging in order to minimize packaging Environmental harm.

This standard does not apply to transport large quantities of goods between manufacturers and retailers use packaging.

Note. "Consumer" means the members of society to meet the needs of life products sold.

2 Packaging and safety of humans and the environment