Valid

GB/T 15746.1-1995The method of qualitative assessment for vehicle repair (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for GB/T 15746.1-1995 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

July 20, 2011

Implementation date

December 1, 2011

Scope

GB/T 15746.1-1995 (The method of qualitative assessment for vehicle repair) is available as an English-translated PDF.

GB/T 15746.1-1995 — This standard specifies requirements for evaluation and assessment rules auto repair quality inspections. This standard applies to automobile, engine and body repair industry quality inspection.

Found what you need?

Document preview — GB/T 15746.1-1995

National Standard of the People's Republic of China

ICS
43.180
Classification
R 16
Replacing
GB/T 15746.1-1995; GB/T 15746.2-1995; GB/T 15746.3-1995

Issued by: Standardization Administration of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Assessment requirements
  • 4.1 Automobile repair quality

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 15746.1-1995 "auto repair qualitative assessment for vehicle repair", GB/T 15746.2-1995 "auto repair engine overhaul QA assessment standards" and GB/T 15746.3-1995 "auto repair QA assessment standard Quasi-body overhaul. " this standard incorporates GB/T 15746.1-1995, GB/T 15746.2-1995 and GB/T 15746.3-1995 relevant content, the main technical changes in addition to editorial changes outside as follows.

--- Clear standard scope (see Chapter 1, Chapter 1 of the 1995 edition);

--- Cancel some of the terms and definitions (see Chapter 3, Section 3 of the 1995 edition);

--- Chapter 4, the title was changed to "assessment requirements", according to the content of automobile, engine and body repair quality are expressed (see Chapter 4, Chapter 4 of the 1995 edition);

--- The "fundamental overhaul inspection and assessment of technical documentation" to "file maintenance assessment" (see 4.1.1,4.2.1 and 4.3 1, 1995 edition 4.1);

--- In evaluation rules, whether or not to increase the verification of project eligibility determination principle (see 5.2);

--- Added "key items" for the item veto provisions (see 5.3);

--- The "correction factor" to "weighting coefficient", the abolition of the correction factor of key items (see 54, 1995 version 5.4.);

--- Adjust the quantity and quality levels, modified the comprehensive criteria (see 5.1 and Table 1, 1995 edition 5.5);

--- Delete the contents of Chapter 6 (see the 1995 version of Chapter 6);

--- The Appendix "assessment project" column to "Verification Project" (see Appendix A, Appendix B and Appendix C, 1995 edition of Appendix A and Appendix B);

--- Cancel the appendix "inspection methods and means" and "evaluation method" column (see the 1995 edition of Appendix A and Appendix B);

--- Modified automobile repair quality assessment of the technical requirements (see Appendix A, GB/T 15746.1-1995 Annex A and Annex Record B);

--- Modified car engine repair quality assessment of the technical requirements (see Appendix B, GB/T 15746.2-1995 Annex A and Annex Record B);

--- Modify the auto body repair quality assessment of the technical requirements (see Appendix C, GB/T 15746.3-1995 Annex A and Annex Record B).

This standard by the National Automotive Standardization Technical Committee maintenance (SAC/TC247) centralized.

This standard was drafted. Research Institute of Highway Ministry of Transport.

1 Scope

This standard specifies requirements for evaluation and assessment rules auto repair quality inspections.

This standard applies to automobile, engine and body repair industry quality inspection.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3798.1 Technical requirements for completion of vehicle overhaul Part 1. Passenger cars GB/T 3798.2 Technical requirements for completion of vehicle overhaul Part 2. Truck GB/T 3799.1 commercial vehicle engines overhaul completion and technical conditions - Part 1. Gasoline engines GB/T 3799.2 commercial vehicle engines overhaul completion and technical conditions - Part 2. Diesel engine GB 7258 Safety requirements for operation of motor vehicles Integrated Performance requirements GB 18565 and test methods for commercial vehicles

3 Terms and Definitions

The following terms and definitions apply to this document.

Automobile repair quality assessment qualitativeassessmentforthemajorrepairofautomobile Completion of the automobile repair automobile repair quality and repair process of comprehensive evaluation of the degree of perfection of the archives.

Automotive Engine Repair quality assessment qualitativeassessmentforthemajorrepairofautomobileengines Automotive engine repair and completion of quality automotive engine repair during maintenance Comprehensive Assessment Archives degree of perfection.

Auto body repair quality assessment qualitativeassessmentforthemajorrepairofautomobilebodies Completion of quality auto body repair and auto body repair during the maintenance Comprehensive Assessment Archives degree of perfection.

4 Assessment requirements

4.1 Automobile repair quality

4.1.1 File maintenance assessment

Evaluation automobile repair maintenance records should include verification of maintenance contracts, automobile repair single incoming inspection, process inspection and the completion of the single A single test, motor vehicle repair completion and certification, maintenance man six verification project costs and material costs billing lists, etc., see the specific requirements

Table A.1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 15746.1-1995

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 15746.1-1995

$304.00