GB/T 15306.4-2008Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4: Specifications (English PDF)
陶瓷可转位刀片 第4部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 15306.4-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 3, 2008
Implementation date
January 1, 2009
Scope
GB/T 15306.4-2008 is the English-translated version of 陶瓷可转位刀片 第4部分：技术条件.
GB/T 15306.4-2008 is the Chinese standard "Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4: Specifications". Its scope clause reads: GB/T 15306 provisions of this part of the basic requirements for the tip rounded ceramic indexable technical requirements and mark the package.
This section applies to press GB/T 15306.1 ~ 15306.3 production of ceramic indexable inserts. Other ceramic indexable insert should also participate According to use. Its clauses include technical requirements; signs, packaging.
Found what you need?
Document preview — GB/T 15306.4-2008
National Standard of the People's Republic of China
- ICS
- 25.100.01
- Classification
- J 41
- Replacing
- GB/T 15306.4-1994
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Technical requirements
- 4 signs, packaging
1 Scope
GB/T 15306 provisions of this part of the basic requirements for the tip rounded ceramic indexable technical requirements and mark the package.
This section applies to press GB/T 15306.1 ~ 15306.3 production of ceramic indexable inserts. Other ceramic indexable insert should also participate
According to use.
2 Normative references
The following documents contain provisions which, through reference GB/T 15306 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 15306.1 Ceramic indexable inserts - Part 1. nonporous blade size (G grade) (GB/T 15306.1-2008,
ISO 9361-1.1991, MOD)
GB/T 15306.2 Ceramic indexable inserts - Part 2. perforated blade size (GB/T 15306.2-2008, ISO 9361-2.
1991, MOD)
GB/T 15306.3 Ceramic indexable inserts - Part 3. nonporous blade size (U level)
3 Technical requirements
3.1
blade surface may not affect the performance of the defect edge portion may not have lost the edge off angle, the non-working portion off the edge off angle of not more than
0.3mm.
3.2 behind the blades Flatness
concave to not more than 0.05mm, outward projection is not more than 0.03mm.
3.3 insert base surface flatness
only allowed to concave, its value is not greater than 0.05mm.
The main physical and mechanical properties and structure 3.4 blade shall comply with the relevant insert grade standards.
3.5
blade cross section structure should be uniform, may not affect the performance deficiencies.
4 signs, packaging
4.1 mark
4.1.1
Products shall be marked.
--- Factory trademark;
--- Blade model;
--- Ceramic commercial grades. But the blade flat blade circular cylindrical portion size and area of less than 0.8cm2 flag from time to time.
4.1.2
shall be marked on the box.
--- Manufacturer's name, address and trademark;
--- Blade material grades or code;
--- Blade model;
--- The part number and product name (abbreviated available. ceramic or ceramic indexable inserts);
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 15306.2-2008Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole
- GB/T 15306.3-2008Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U)
Similar standards
Editions of GB/T 15306.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 15306.4-2008 | Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4: Specifications | current edition | Current |
| GB/T 15306.4-1994 | Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4: Specifications | previous edition | Superseded |
This page sells the current edition, GB/T 15306.4-2008. Earlier editions are listed for reference only.
How to Download GB/T 15306.4-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15306.1-2008 — Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole (Class G)
GB/T 15306.2-2008 — Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole
GB/T 15306.3-2008 — Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U)
Secure payment via Stripe
Payments accepted
GB/T 15306.4-2008
$75.00