GB/T 14580-2013Fixed capacitors for use in electronic equipment -- Part 17-1: Blank detail specification -- Fixed metallized polypropylene film dielectric a.c. and pulse capacitors -- Assessment level E and EZ (English PDF)

Foreword

"Fixed capacitors for use in electronic equipment" series of national standards divided into the following sections.

--- Part 1. Generic specification (GB/T 2693-2001/IEC 60384-1:1999);

--- Part 2. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors (GB/T 7332-2011 /IEC 60384-2:2005);

--- Part 2-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors - Assessment level E and EZ (GB/T 7333-2012/IEC 60384-2-1:2005);

--- Part 3. Sectional specification for surface mounting MnO2 solid electrolyte capacitors - (IEC 60384-3:2007);

--- Part 3-1. Blank detail specification surface mount MnO2 solid electrolyte tantalum capacitors - Assessment level EZ (IEC 60384-3-1:2007);

--- Part 4. Sectional specification solid and non-solid electrolyte aluminum electrolytic capacitors (GB/T 5993-2003/IEC 60384-4.

1998, No. 1 amendments 2000);

--- Part 4-1. Blank detail specification non-solid electrolyte aluminum electrolytic capacitors - Assessment level EZ (GB/T 5994-2003 /IEC 60384-4:2000);

--- Part 4-2. Blank detail specification solid (MnO2) electrolyte aluminum electrolytic capacitors - Assessment level EZ (IEC 60384-4-2:2007);

--- Part 6. Sectional specification - Fixed metallized polycarbonate film dielectric dc capacitors (IEC 60384-6:2005);

--- Part 7. Sectional specification metal foil polystyrene film dielectric dc capacitors (GB/T 10185-2012);

--- Part 7-1. Blank detail specification polystyrene film dielectric metal foil dc capacitors - Assessment level E (GB/T 10186-2012);

--- Part 8. Sectional specification Fixed capacitors of ceramic dielectric, Class 1 (GB/T 5966-2011/IEC 60384-8:2005);

--- Part 8-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ (GB/T 5967-2011 /IEC 60384-8-1:2005);

--- Part 9. Sectional specification Fixed capacitors of ceramic dielectric, Class 2 (GB/T 5968-2011/IEC 60384-9:2005);

--- Part 9-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (GB/T 5969-2012 /IEC 60384-9-1:2005);

--- Part 11. Sectional specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11:2008);

--- Part 11-1. Blank detail specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11-1:2008);

--- Part 13. Sectional specification polypropylene film dielectric metal foil dc capacitors (IEC 60384-13:2011);

--- Part 13-1. Blank detail specification polypropylene film dielectric metal foil dc capacitors - Assessment levels E and EZ (GB/T 10189-2013/IEC 60384-13-1:2006);

--- Part 14. Sectional specification curb the power of electromagnetic interference with a fixed capacitor (GB/T 14472-1998/IEC 60384-14.

2005);

--- Part 14-1. Blank detail specification curb the power of electromagnetic interference capacitors - Assessment level D (GB/T 14473-1998/IEC 60384-14-1:2005);

--- Part 15. Sectional specification non-solid or solid electrolyte capacitors - (GB/T 7213-2003/IEC 60384-15.

1982, No. 1 amendments. 1987, No. 2 amendments 1992);

--- Part 15-1. Blank detail specification solid electrolyte tantalum foil capacitors - Assessment level E (GB/T 12794-1991 /IEC 60384-15-1. 1984);

--- 15-2. Blank detail specification sintered solid electrolyte tantalum capacitors - Assessment level E (GB/T 12795-1991/IEC 60384-15-2. 1984);

--- 15-3. Blank detail specification solid electrolyte and porous anode tantalum capacitors - Assessment level E (GB/T 7214-2003/IEC 60384-15-3. 1984);

--- Part 16. Sectional specification - Fixed metallized polypropylene film dielectric dc capacitors (GB/T 10190-2012 /IEC 60384-16:2005);

--- Part 16-1. Blank detail specification metallized polypropylene film dielectric dc capacitors - Assessment levels E and EZ (GB/T 10191-2011/IEC 60384-16-1:2005);

--- Part 17. Sectional specification - Fixed metallized polypropylene film dielectric ac and pulse capacitors (GB/T 14579-2013 /IEC 60384-17:2005);

--- Part 17-1. Blank detail specification metallized polypropylene film dielectric ac and pulse capacitors - Assessment level E and

--- Part 18. Sectional specification surface mount solid and non-solid electrolyte aluminum electrolytic fixed capacitors (GB/T 17206-1998 /IEC 60384-18:1993, No. 1 amendments 1998);

--- Part 18-1. Blank detail specification surface mount solid (MnO2) electrolyte aluminum capacitors - Assessment level EZ (GB/T 17207-2012/IEC 60384-18-1:2007);

--- 18-2. Blank detail specification non-solid electrolyte chip aluminum electrolytic capacitors - Assessment level E (GB/T 17208-1998/IEC 60384-18-2:1993);

--- Part 19. Sectional specification surface mount metallized polyethylene terephthalate film dielectric dc capacitors (GB/T 15448-2013/IEC 60384-19:2006);

--- Part 19-1. Blank detail specification surface mount metallized polyethylene terephthalate film dielectric dc capacitors Assessment level EZ (GB/T 16467-2013/IEC 60384-19-1:2005);

--- Part 21. Sectional specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21041-2007/IEC 60384-21.

2004);

--- Part 21-1. Blank detail specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21038-2007 /IEC 60384-21-1:2004);

--- Part 22. Sectional specification Class 2 surface mount multilayer ceramic capacitors fixed (GB/T 21042-2007/IEC 60384-22.

2004);

--- Part 22-1. Blank detail specification Class 2 surface mount multilayer ceramic capacitors fixed (GB/T 21040-2007 /IEC 60384-22-1:2004).

This section "Fixed capacitors for use in electronic equipment" Part 17-1.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GB/T 14580-1993 "Fixed capacitors for use in electronic equipment - Part 17. Blank detail specification - Fixed metallized polypropylene Ene-film dielectric ac and pulse capacitors - Assessment level E ". Section compared with the GB/T 14580-1993, the main change this as follows.

--- Assessment level EZ increased requirements;

--- Increased A0 packet inspection;

--- Low air pressure by the pressure to 8.5kPa 8kPa;

--- The A1 IL packet by the S-4 to S-3;

--- A2 by the grouping IL II to S-3;

--- 4.2.3 Supplementary Provisions of the loss tangent test frequency;

--- Canonical name from the "Section 17" is replaced by "Article 17-1 section." this section uses the translation method is equivalent to using IEC 60384-17-1:2005 "Fixed capacitors for use in electronic equipment - Part 17-1. Blank detail Fine specification metallized polypropylene film dielectric ac and pulse capacitors - Assessment levels E and EZ ".

Consistency correspondence between this part of international documents and normative references of our files are as follows.

--- GB/T 2693-2001 Fixed capacitors for use in electronic equipment - Part 1. Generic specification (idt IEC 60384-1:1999);

--- GB/T 14579-2013 Fixed capacitors for use in electronic equipment. Part 17. Sectional specification metallized polypropylene film dielectric post Flow and pulse capacitors (IEC 60384-17:2005, IDT).

This section includes the following editorial changes.

--- IEC Page 2 Note 2 to Note 1.

This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

This part of the National Equipment RC components Electronic Standardization Technical Committee (SAC/TC165) centralized.

This section is drafted. Chengdu Hongming Electronics Co., Ltd.

Introduction

Blank detail specification Blank detail specification is a supplementary specification documents that include formatting, layout and minimum content of detail specifications requirements. Do not Comply with these requirements detailed specification that is inconsistent with the electronic components of assessed quality system requirements specification. In developing detailed specifications, sit Taking into account the contents of specification 1.4.

Identification and detailed specification of capacitors (1) authorized the drafting of the detailed specifications of the organization. IEC or national standards bodies.

(2) IEC or National Standards number of the detail specification, publication date, and other national content standards require.

(3) The total number and version number specification IEC or national standards.

(4) IEC or national standards Blank detail specification number.

Identification capacitor (5) a brief description of the type capacitor.

Description (6) Typical structure (when applicable).

NOTE. When the capacitor is not designed for printed circuit boards, it should be clearly explained in the detailed specification of this position.

(7) Effect of interchangeability of the main dimensions of the outline drawing and (or) national or international reference document profile area. In addition, you can also Detailed specification given in the Appendix of this diagram.

(8) involved in the applications or application groups and (or) assessment level.

NOTE. For detailed specification used in one or several assessment level should be selected specification 3.5.4. This means that as long as the test packet unchanged, several assessment Level can share a blank detail specification.

(9) an important characteristic reference data for between various types of capacitors were compared.

IEC 60384-17-1:2005

QC ×××××× (2)

Electronic Component level of quality assessment by. (3) IEC 60384-17-1:2005 (4) Metallized polypropylene film dielectric ac and pulse capacitors (5)