GB/T 13772.3-2008Textiles -- Determination of the slippage resistance of yarns at a seam in woven fabrics -- Part 3: Needle clamp method (English PDF)
纺织品 机织物接缝处纱线抗滑移的测定 第3部分:针夹法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 13772.3-2008 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 31, 2008
Implementation date
August 1, 2009
Scope
GB/T 13772.3-2008 is the English-translated version of 纺织品 机织物接缝处纱线抗滑移的测定 第3部分:针夹法.
GB/T 13772.3-2008 — This section GB/T 13772 specifies the woven fabrics of yarn slippage resistance method under a certain load to the needle holder in the form of measurement.
This method avoids the test bias caused by the suture, and this deviation will sometimes test results have a significant impact. This method does not apply to an elastic fabric or webbing and other industrial fabrics.
Found what you need?
Document preview — GB/T 13772.3-2008
National Standard of the People's Republic of China
- ICS
- 59.080.30
- Classification
- W 04
- Replacing
- GB/T 13772.2-1992
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
GB/T 13772 "textile yarns at a seam in woven fabrics - Determination of anti-slip" includes the following four parts.
--- Part 1. Fixed amount of slip method;
--- Part 2. Fixed load method;
--- Part 3. Needle clamp method;
--- Part 4. friction law.
This section GB/T 13772 Part 3.
This section uses the translation method identical with ISO 13936-3:2005 Determination of "textile yarns at a seam in woven fabrics anti-slip 3 Part I. Needle clamp method. " this part of ISO 13936-3:2005 compared with the following editorial changes.
--- Normative documents in place of the corresponding international standards set by our standards;
--- Deleted international standards foreword;
--- The contents of the table in Figure 1 ISO incorporated in Table 1;
--- Information Appendix C as the Chapter 8. Note 2.
This Part replaces GB/T 13772.2-1992 "woven fabrics of yarn slippage resistance measurement method simulation suture." This portion GB/T 13772.2-1992 main technical differences are as follows.
1. Standard name from analog to suture needle clamp method;
2. Increase the NA range of products;
3. Normative references have been adjusted to increase the tensile tester relevant standards;
4. Chapter 3 is amended as six terms terminology;
5. Chapter 4 of the principle has been modified;
6. It provides test equipment for the CRE tensile tester, tensile tester for CRE proposes specific requirements;
7. By a stretching speed 100mm/min to 50mm/min;
8. Specifications for needles made some changes, the series of values \u200b\u200bin Table 1;
9. Adjusted by the sample length 150mm 300mm;
10. The determination of different kinds of fabric used in load slippage specific provisions;
11. Provides for the termination load is 250N;
12. Modification of the original Appendix A, an increase in Appendix B.
This section of the Appendices A and B are informative appendices.
This part is proposed by the China Textile Industry Association.
This part of the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized.
This section drafted by. National Textile Products Quality Supervision and Inspection Center, Textile Standard (Beijing) Co., Inspection and Certification Center.
1 Scope
This section GB/T 13772 specifies the woven fabrics of yarn slippage resistance method under a certain load to the needle holder in the form of measurement.
This method avoids the test bias caused by the suture, and this deviation will sometimes test results have a significant impact.
This method does not apply to an elastic fabric or webbing and other industrial fabrics.
2 Normative references
The following documents contain provisions which, through reference GB/T 13772 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 6529 Textiles conditioning and testing using standard atmosphere (GB/T 6529-2008, ISO 139:2005, MOD) Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1 Associate (GB/T 16825.1-2002, ISO 7500-1:1999, IDT) GB/T 19022 measuring equipment management systems for measurement processes and measuring equipment (GB/T 19022-2003, ISO 10012.
2003, IDT)
3 Terms and Definitions
The following terms and definitions apply to this part of the GB/T 13772 of.
Throughout the test, the specimen holder holding a fixed, the other at a constant velocity, so that the elongation time of sample into Proportional to a test instrument.
The entire width of the sample is drawn to test a fabric holder clamped.
Since the stretching action, moving weft woven fabrics (warp) yarns in the warp (weft) yarn produced.
Warp direction perpendicular to the stretch, to move on the weft yarn.
GB/T 13772.3-2008/ISO 13936-3:2005
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6529Textiles - Standard atmospheres for conditioning and testing
- GB/T 6529-2008Textiles - Standard atmospheres for conditioning and testing
- GB/T 16825.1Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
- GB/T 16825.1-2002Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
- GB/T 19022Measurement management systems -- Requirements for measurement processes and measuring equipment
- GB/T 19022-2003Measurement management systems -- Requirements for measurement processes and measuring equipment
GB/T 13772 · ISO 139 · ISO 7500 · ISO 10012
How to Download GB/T 13772.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13772.1-2008 — Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method
GB/T 13772.2-2018 — Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
GB/T 13772.4-2008 — Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 4: Friction method
Secure payment via Stripe
Payments accepted
GB/T 13772.3-2008
$145.00