GB/T 12467.5-2009Quality requirements for fusion welding of metallic materials -- Part 5: Standard documents need to conform to claim conformity to the quality requirements (English PDF)
金属材料熔焊质量要求 第5部分：满足质量要求应依据的标准文件
This is a limited preview
Buy now to download the full PDF (2 pages)
Need quotation for your management?
Get a formal quotation for GB/T 12467.5-2009 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2009
Implementation date
April 1, 2010
Scope
GB/T 12467.5-2009 is the English-translated version of 金属材料熔焊质量要求 第5部分：满足质量要求应依据的标准文件.
GB/T 12467.5-2009 — This section GB/T 12467 requirements in line with GB/T 12467.2, GB/T 12467.3 and GB/T 12467.4 quality requirements should Standard Guide is based.
This section applies to manufacturers of welding capacity evaluation and certification, this section should be GB/T 12467.2, GB/T 12467.3 and GB/T 12467.4 supporting the use.
Found what you need?
Document preview — GB/T 12467.5-2009
National Standard of the People's Republic of China
- ICS
- 25.160.01
- Classification
- J 33
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Meet the quality requirements should be based on standard file
- 2.1 General principles
- 2.2 Standard document
Foreword
GB/T 12467 "quality welding of metallic materials" is divided into five parts.
--- Part 1. Quality requirements of the appropriate level of selection criteria;
--- Part 2. Comprehensive quality requirements;
--- Part 3. General quality requirements;
--- Part 4. Elementary quality requirements;
--- Part 5. meet the quality requirements should be based on standard file.
This section GB/T Part of 512,467.
This part identical with ISO 3834-5:2005 "Quality requirements for fusion welding of metallic materials - Part 5. confirm compliance with ISO 3834-2, ISO 3834-3 or ISO 3834-4 quality requirements needed to file "(in English).
This section is equivalent translation ISO 3834-5:2005.
For ease of use, this section made the following editorial changes.
--- Deleted international standards foreword;
--- The standard name be changed to "standard documents meet the quality requirements should be based.";
--- The ISO 3834-5. those ISO standards, our standards with the like 2005 are listed in the same time, using our standard; our standard Associate with unequal same time, the direct use of the ISO standards;
--- Appendix A specification uses the new version currently in force, with Doc. IAB-252-2007 replaced Doc. IAB-002-2000 /EWF-409, Doc. IAB-003-2000/EWF-410, Doc. IAB-004-2000/EWF-411.
This part of the National Standardization Technical Committee welded and centralized.
This section is drafted. Harbin Welding Institute, Harbin Welding Machinery Industry Training Center.
1 Scope
This section GB/T 12467 requirements in line with GB/T 12467.2, GB/T 12467.3 and GB/T 12467.4 quality requirements should Standard Guide is based.
This section applies to manufacturers of welding capacity evaluation and certification, this section should be GB/T 12467.2, GB/T 12467.3 and GB/T 12467.4 supporting the use.
2 Meet the quality requirements should be based on standard file
2.1 General principles
Sure that the manufacturer meets the GB/T 12467.2, when GB/T 12467.3 and GB/T 12467.4 quality requirements, the need to verify the manufacturer Suppliers of production standards adopted those standards (or other standards with which the technical content equivalent) listed 2.2.
When other manufacturers use different standards, it should provide the standard of proof in terms of technical content consistency. Certificate (or the manufacturer's self Statement) should be clear criteria document manufacturer uses.
2.2 Standard document
Manufacturer according to GB/T 12467.2, when GB/T 12467.3 and GB/T 12467.4 welding activities, the following criteria should be used to text Valid version member.
GB/T 9445 NDT personnel qualification and certification (GB/T 9445-2008, ISO 9712:2005, IDT) GB/T 15169 steel welders - Fusion welding skills assessment (GB/T 15169-2003, ISO/DIS9606-1.2002, IDT) GB/T 18591 welding preheating temperature, interpass temperature and preheat maintenance temperature measurement guidelines (GB/T 18591-2001, ISO 13916:1996, IDT) GB/T 19419 welding management tasks and responsibilities (GB/T 19419-2003, ISO 14731:1997, IDT) GB/T 19805 welding operator skills assessment (GB/T 19805-2005, ISO 14732:1998, IDT) GB/T 19866 welding procedures and general assessment principles (GB/T 19866-2005, ISO 15607:2003, IDT) GB/T 19867.1 arc welding procedure specification (GB/T 19867.1-2005, ISO 15609-1:2004, IDT) GB/T 19867.2 gas welding procedure specification (GB/T 19867.2-2008, ISO 15609-2:2001, IDT) GB/T 19867.3 electron beam welding procedure specification (GB/T 19867.3-2008, ISO 15609-3:2004, IDT) GB/T 19867.4 laser welding procedure specification (GB/T 19867.4-2008, ISO 15609-4:2004, IDT) GB/T 19868.1-based procedure qualification test welding materials (GB/T 19868.1-2005, ISO 15610:2003, IDT) GB/T 19868.2 welding procedure qualification based on experience (GB/T 19868.2-2005, ISO 15611:2003, IDT) GB/T 19868.3 standard welding procedure qualification based procedures (GB/T 19868.3-2005, ISO 15612:2004, IDT) GB/T 19868.4 pre-production welding procedure qualification test (GB/T 19868.4-2005, ISO 15613:2004, IDT) GB/T 19869.1 steel, nickel and nickel alloy welding procedure qualification test (GB/T 19869.1-2005, ISO 15614-1:2004, GB/T 12467.5-2009/ISO 3834-5:2005
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 2 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 17116.1-2018Pipe supports and hangers - Part 1: Technical specification
- JB/T 13367-2018Forklift truck attachments - Tilting carriage
- JB/T 13368-2018Forklift truck attachments - Bale clamp
- MH/T 6013-2018Apron lifting high pole light
- JB/T 12450-2015Animal husbandry machinery - Manure removal systems
- JB/T 11840-2014Forklift Truck - Sideshifter
How to Download GB/T 12467.5-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12467.1-2009 — Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the selection of the appropriate level of quality requirements
GB/T 12467.2-2009 — Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality requirements
GB/T 12467.3-2009 — Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality requirements
Secure payment via Stripe
Payments accepted
GB/T 12467.5-2009
$15.00