GB/T 11313.15-2018Radio frequency connectors -- Part 15: R. F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in), characteristic impedance 50 ohms, screw coupling (Type SMA) (English PDF)
射频连接器 第15部分：外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型)
This is a limited preview
Buy now to download the full PDF (37 pages)
Need quotation for your management?
Get a formal quotation for GB/T 11313.15-2018 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
March 15, 2018
Implementation date
October 1, 2018
Scope
GB/T 11313.15-2018 is the English-translated version of 射频连接器 第15部分：外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型).
GB/T 11313.15-2018 is the Chinese standard "Radio frequency connectors -- Part 15: R. F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in), characteristic impedance 50 ohms, screw coupling (Type SMA)".
Its scope clause reads: This part of GB/T 11313 specifies the dimensions of the mating interface for class 2 universal connectors and the detailed dimensions of class 0 standard test connectors, and detailed specifications for all detailed specifications of SMA type RF coaxial connectors selected from GB/T 11313.1-2013 Summation test procedure.
This section also specifies the recommended ratings and characteristics that should be considered in the preparation of detailed specifications, and specifies the applicable to M-level and H-level assessments Graded test schedules and inspection requirements, as well as content and rules for the detailed specification of SMA type RF coaxial connectors, and detailed specifications Van's blank format.
This section applies to the outer conductor inner diameter of 4.13mm (0.163in), characteristic impedance of 50ohm, operating frequency of 18GHz thread Connect SMA type RF connectors, which can be connected to RF cables, microstrips and other transmission lines. Its clauses include mating interface and standard gauge.
Found what you need?
Document preview — GB/T 11313.15-2018
National Standard of the People's Republic of China
- ICS
- 33.120.30
- Classification
- L 23
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 mating interface and standard gauge
- 3.1 Universal Connector-2 Level
- 3.2 Standard gauge - standard gauge for jack connector
- 3.3 Standard Test Connector - Level
- 4 Quality Assessment Procedure
- 4.1 General Clause
- 4.2 Ratings and Characteristics
- 4.3 Test List and Inspection Requirements
- 5 Detailed Specification Development Guide
- 5.1 General rule
- 5.2 Identification of detailed specifications
- 5.3 Component Identification
- 5.4 Performance
- 5.5 Marks, Order Documents and Related Matters
- 5.6 Selection of Tests, Test Conditions and Severity
- 5.7 Blank detail specification format 14 for SMA connectors
1 Scope
This part of GB/T 11313 specifies the dimensions of the mating interface for class 2 universal connectors and the detailed dimensions of class 0 standard test connectors.
And detailed specifications for all detailed specifications of SMA type RF coaxial connectors selected from GB/T 11313.1-2013
Summation test procedure.
This section also specifies the recommended ratings and characteristics that should be considered in the preparation of detailed specifications, and specifies the applicable to M-level and H-level assessments
Graded test schedules and inspection requirements, as well as content and rules for the detailed specification of SMA type RF coaxial connectors, and detailed specifications
Van's blank format.
This section applies to the outer conductor inner diameter of 4.13mm (0.163in), characteristic impedance of 50ohm, operating frequency of 18GHz thread
Connect SMA type RF connectors, which can be connected to RF cables, microstrips and other transmission lines.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 11313.1-2013 RF connectors Part 1. Generic specification General requirements and test methods (IEC 61169-1.
1998, IDT)
3 mating interface and standard gauge
The original dimensions in this section are in millimeters. All unsized graphics are for reference only.
3.1 Universal Connector - Level 2
3.1.1 Pin connector
Pin connector interface shown in Figure 1, the size of Table 1.
GB/T 17737.100 | GB/T 21711.1 | GB/T 11313.13 | GB/T 11313.11 | GB/T 11313.8 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 11313.15-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11313.1-2013 — Radio-frequency connectors -- Part 1: Generic specification -- General requirements and measuring methods
GB/T 11313.16-2015 — Radio-frequency connectors -- Part 16: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling -- Characteristics impedance 50Ω (75 Ω) (type N)
GB/T 11313.13-2018 — Radio-frequency connectors -- Part 13: Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors
Secure payment via Stripe
Payments accepted
GB/T 11313.15-2018
$355.00