GB/T 10395.5-2021Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (English PDF)

1 Scope

This document specifies the structural safety requirements and criteria for agricultural machinery mounted, semi-mounted and trailed power-driven soil tillage machinery:

This document also specifies the type of information on safe operations (including residual risks) that the manufacturer should provide:

The significant hazards (listed in Appendix A) covered in this document, hazardous states and events are related to the use of drive-driven tillage under conditions foreseeable by the manufacturer for mechanical correlation (see Chapter 4):

This document does not apply to:

--- Shovel;

---A machine equipped with a retractable device that can continuously operate between crops:

This document does not cover environmental hazards or hazards associated with power transmission moving parts and professional maintenance of machinery, but

Except for guarding and barrier strength requirements:

Note 1: This document does not address hazards related to road traffic management:

Note 2: For suspended, semi-suspended and towed machinery, this document does not consider vibration as a significant hazard:

This document does not apply to driven tillage machinery produced prior to the promulgation of this document:

If the requirements of this document differ from those of ISO 4254-1, the requirements of this document for machines designed and built in accordance with the provisions of this document

The request takes precedence over the requirements of ISO 4254-1:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

ISO 4254-1:2013 Agricultural Machinery Safety Part 1: General (Agriculturalmachinery-Safety-Part 1:

General requirements)

ISO 12100 Safety of machinery design general risk assessment and risk reduction (Safetyofmachinery-General principlesfordesign-Riskassessmentandriskreduction)

3 Terms and Definitions

Terms and definitions defined in ISO 12100 and ISO 4254-1 and the following terms and definitions apply to this document: ISO and IEC maintain the following terms database to use:

---IEC Electropedia: available for download at http://www:electropedia:org/;

---ISO Online Browsing Platform is available: https://www:iso:org/obp:

3:1 power-drivensoil-workingmachines

With power-driven working parts, it can change the soil structure or profile, and cut or cut plant residues or manure in the soil during the operation:

GB/T 2818 | GB/T 12785 | GB 10395.19 | GB 10395.7 | GB 10395.6 | GB 10395.1 | […]