GB 50092-1996Code for Construction and Acceptance of Asphalt Pavement (English PDF)

Contents

• 2 Terms, Symbols and Codes
• 2.1 Terms
• 2.1.1 Petroleum asphalt
• 2.1.2 Road petroleum asphalt
• 2.1.3 Heavy traffic road petroleum asphalt
• 2.1.4 Coal asphalt
• 2.1.5 Mixed asphalt
• 2.1.6 Emulsified asphalt
• 2.1.7 Cationic emulsified asphalt
• 2.1.8 Anionic emulsified asphalt
• 2.1.9 Liquefied petroleum asphalt
• 2.1.10 Modified asphalt
• 1 General Provision
• 2.2 Symbol and Code
• 3 Base Courses
• 4 Materials
• 4.1 General Requirement
• 4.2 Road Petroleum Asphalt
• 4.3 Emulsified asphalt
• 4.4 Liquefied Petroleum Asphalt
• 4.5 Coal Asphalt
• 4.6 Coarse Aggregate
• 4.7 Fine Aggregate
• 4.8 Padding
• 5 Asphalt Surface Dressing Pavement
• 5.1 General Requirement
• 5.2 Material Specifications and Consumption
• 5.3 Construction Machinery
• 5.4 Preparation of Construction
• 5.5 Construction Method
• 6 Asphalt Penetration Pavement
• 6.1 General Requirements
• 6.2 Material Specifications and Consumption
• 6.3 Construction Machinery
• 6.4 Preparation of Construction
• 6.5 Construction Method
• 7 Hot-mix Asphalt Mixture Pavement
• 7.1 General Requirements
• 7.2 Preparation of Construction
• 7.3 Mix proportion design of Hot-mix Asphalt Mixture
• 7.4 Mixing of Hot-mix Asphalt Mixture
• 7.5 Transportation of Hot-mix Asphalt Mixture
• 7.6 Spreading of Hot-mix Asphalt Mixture
• 7.7 Compaction and Molding of Hot-mix Asphalt Mixture
• 7.8 Seaming
• 7.9 Opening to Traffic and Others
• 8 Emulsified Asphalt Crushed stone Mixture Pavement
• 8.1 General Provisions
• 8.2 Construction Preparations
• 8.3 Mix Proportion Design of Emulsified Asphalt Crushed stone Mixture
• 8.4 Construction of Emulsified Asphalt Crushed stone Mixture Pavement
• 9 Prime Layer, Blanket Layer and Seal
• 9.1 Prime Layer
• 9.2 Blanket layer
• 9.3 Seal
• 10 Other Projects
• 10.1 General Provision
• 10.2 Pedestrian Road
• 10.3 Parking Lot for Heavy Vehicle and Bus Station
• 10.4 Asphalt Paving on the Bridge Deck Made of Cement Concrete
• 10.5 Curbstone
• 10.6 Gully and Inspection Shaft
• 11 Construction Quality Administrations and Inspection/Acceptance
• 11.1 General Provision
• 11.2 Material and Equipment Inspection before Construction Carried Out
• 11.3 Test Pavement Section Paving
• 11.4 Quality Administration and Inspection in the Construction Process
• 11.5 Construction Quality Inspection and Acceptance in Handover Acceptance Stage
• 11.6 Project Construction Conclusion
• 7.5 Transportation of Hot-mix Aspha