GB 4806.12-2022National food safety standard - Bamboo and wood materials and products for food contact (English PDF)
食品安全国家标准 食品接触用竹木材料及制品
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB 4806.12-2022 in 30 minutes.
Issued by
NHC; SAMR
Level / Type
National · Mandatory
Issue date
June 30, 2022
Implementation date
December 30, 2022
Scope
GB 4806.12-2022 is the English-translated version of 食品安全国家标准 食品接触用竹木材料及制品.
GB 4806.12-2022 — This Standard applies to bamboo and wood materials and products for food contact.
Found what you need?
Document preview — GB 4806.12-2022
National Standard of the People's Republic of China
Issued by: NHC; SAMR
Contents
- 1 Scope3
- 2 Terms and definitions3
- 3 Basic requirements3
- 4 Technical requirements3
- 5 Other5
- Appendix A Determination of sulfur dioxide migration in bamboo and wood materials and products for food contact6
- Appendix B Determination of thiabendazole, o-Phenylphenol, imazalil and biphenyl in bamboo and wood materials and products for food contact10
1 Scope
This Standard applies to bamboo and wood materials and products for food contact.
2 Terms and definitions
2.1 Bamboo and wood materials and products for food contact
A variety of materials and products made of bamboo, wood or cork wood that have been or are expected to come into contact with food or food additives (hereinafter referred to as food) under normal conditions of use,
3 Basic requirements
Bamboo and wood materials and products for food contact shall comply with the provisions of GB 4806.1.
4 Technical requirements
4.1 Raw material requirements
4.1.1 The raw materials used in bamboo and wood materials and products for food
contact shall not cause harm to human health.
4.2 Sensory requirements
Sensory requirements shall meet the requirements of Table 1.
4.3 Physical and chemical indicators
4.3.1 General physical and chemical indicators
General physical and chemical indicators shall comply with the provisions of Table 2 and Table 3.
4.3.2 Other physical and chemical indicators
Bamboo and wood materials and products for food contact shall comply with the provisions of GB 9685 and related announcements on physical and chemical indicators of oils, waxes and other additives, such as specific migration limit (SML), specific total migration limit [SML(T)] and maximum residue limit (QM).
4.4 Microbial limit
Microorganisms of bamboo and wood materials and products, which are expected to come into direct contact with food and are used directly without disinfection or cleaning, shall comply with the provisions of GB 14934.
4.5 Other technical requirements
Bamboo and wood materials and products for food contact, which use materials such as coatings, inks, and/or adhesives, etc., shall also comply with the corresponding national food safety standards for coatings, inks, and/or adhesives.
5 Other
5.1 Migration test
Migration test shall be carried out in accordance with the provisions of GB 31604.1 and
GB 5009.156, unless there are special provisions in this Standard.
5.2 Label identification
Label identification shall comply with the provisions of GB 4806.1.
Appendix A Determination of sulfur dioxide migration in bamboo and wood materials and products for food contact
A.1 Principle Select water as the food simulant. The specimen is subjected to migration test. The sulfur dioxide in the specimen migrates to the water. In a closed device, acidify and distill the test solution, to release the sulfur dioxide therein.
A.2 Reagents and materials Carry out in accordance with Clause 3 of GB 31604.32-2016 first method (titration method).
A.3 Instruments and equipment Carry out in accordance with Clause 4 of GB 31604.32-2016 first method (titration method); in which the iodine volumetric flask is changed to a pear-shaped flask; the all-glass distillation device is shown in Figure A.1.
A.4 Analytical procedure A.5 Results and presentation The migration of sulfur dioxide in the specimen is calculated according to formula (A.1).
A.6 Precision When the amount of sulfur dioxide migration is not higher than 5 mg/kg, the absolute difference between two independent test results obtained under repeatability conditions must not exceed 20% of the arithmetic mean.
A.7 Other The limit of quantification for the migration of sulfur dioxide in food simulant in this method is 1.0 mg/kg.
Appendix B Determination of thiabendazole, o-Phenylphenol, imazalil and biphenyl in bamboo and wood materials and products for food contact
B.1 Principle Take a representative sample; after crushing, use methanol to extract; rotary evaporate to dryness. Use methanol to make up to volume; after filtering, use high-performance liquid chromatograph equipped with diode array detector or UV detector for detection;
use external standard method to quantify.
B.2 Reagents and materials B.3 Instruments and equipment B.4 Analytical procedure
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
How to Download GB 4806.12-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4806.13-2023 — National food safety standard - Composite materials and products for food contact
GB 4806.11-2016 — National food safety standard - Food contact rubber materials and products
GB 4806.14-2023 — National food safety standard - Ink for food contact materials and products
GB 4806.12-2022
$150.00