Valid

GB 29280-2012Information technology - Tibetan ideogram coded character set (extension set B). 24��48 dot matrix font - Bkav bstan bold (English PDF)

信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹黑体

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB 29280-2012 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Mandatory

Issue date

December 31, 2012

Implementation date

December 1, 2013

Scope

GB 29280-2012 is the English-translated version of 信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹黑体.

GB 29280-2012 — This standard specifies the GB/T 22238-2008 in Tibetan pattern of 24 × 48 dot matrix character ldan bold type. This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.

Found what you need?

Document preview — GB 29280-2012

National Standard of the People's Republic of China

ICS
35.040
Classification
L 71

Issued by: Standardization Administration of China

Contents

  • Introduction
  • Introduction
  • 1 Scope
  • 2 Normative References
  • Terms and definitions 1
  • 4 Is a standard data management
  • 5 Dot font representation
  • 6 Tibetan bitmap fonts
  • Appendix A (informative) Tibetan Ganden blackbody
  • Annex B (normative) Tibetan 24 × 48 dot matrix font data

Foreword

All technical contents of this standard is mandatory.

This standard was drafted in accordance with rules GB/T 1.1-2009 given.

This standard is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).

Drafted by. China Electronics Standardization Institute, Ltd. Weifang Beida Jade Bird Huaguang typesetting, China Tibetan Studies Heart, Tibet Tibetan Language Work Committee Office.

Drafters of this standard. Gao Lin, Xu Zhiqiang, on behalf of the red, Cong Bo, Yan Jianmin, Xiong Tao, Zhou Hua, Chen Zhuang, Lvjian Chun, Bao Gong Dagestan, Wang Jianrong, Zhang Ruihua.

Introduction

This standard part Sanskrit and Tibetan "Information technology - Tibetan coded character set - Extension B" as defined in accordance with GB/T 22238-2008 Sound transfer Tibetan character to our Tibetan region-specific font based on the design and provision of information systems with 24 × 48 dot matrix Tibetan Ganden Black (see Appendix A) font.

Authorize the relevant font data transfer using matters font standard data maintenance, updating and revision of the unified responsibility of focal point.

Address. Dongcheng District Andingmen East Avenue (Beijing 1101 mailbox) Postal Code. 100007 Tel. 6,400,768,984,029,173 Fax. 64007681 E-mail. daihong@cesi.ac.cn Information technology - Tibetan coded character set (Set Extended B) 24 × 48 dot font bold ldan

1 Scope

This standard specifies the GB/T 22238-2008 in Tibetan pattern of 24 × 48 dot matrix character ldan bold type.

This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only applies to the version dated paper Pieces. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 22238-2008 Information technology - Tibetan coded character set - Extension B

3 Terms and Definitions

The following terms and definitions apply to this document.

Font glyph

A recognizable abstract graphic symbols, it does not depend on any particular design.

Font font

It has shaped the image of the same basic design of the collection, such as. Ganden bold.

Bitmap font dotmatrixfont to rendezvous to phenotype graphic character (shape).

Word order characterorder in the graphic character set is arranged in order according to certain rules.

4 Standard data management

To strengthen the management of electronic information technology products Tibetan font standard data, to ensure the correctness of the implementation of this standard in data and Consistency to authorize the use of font data transfer issues, to maintain the standard font data, updating and revision, unified by a centralized unit be responsible for.

5 Dot font representation

5.1 Grid

Raster is formed by the vertical and horizontal lines intersecting equidistant from several pieces.

Specified in this standard is 24 × 48 dot matrix font, which is transverse grid 24 grid, 48 longitudinal grid. The center of each grid point in a given Heart position.

Only the grid points constituting each lattice positioning grid shown in Figure 1.

FIG matrix 1 24 × 48 grid of FIG.

5.2 Points

Point is the minimum unit of dot font, which is located within each square black areas.

5.3 Dot matrix typeface

Tibetan word bitmap fonts from several points located within the set of grid FIG. Tibetan "" The 24 × 48 dot matrix font as 2 shown in FIG.

FIG 2 24 × 48 dot matrix Tibetan "" font

6 Tibetan bitmap fonts

6.1 The number of characters this provides a standard GB/T 22238-2008 5701 Tibetan predetermined pattern of 24 × 48 dot matrix characters ldan bold type.

6.2 Word order

This standard provides 5701 Tibetan pattern of 24 × 48 dot matrix characters ldan bold type according to GB/T 22238-2008 predetermined Character alignment word order.

6.3 Tibetan font data

Tibetan 24 × 48 dot font data representation, Appendix B.

Tibetan bitmap font table 6.4 this provides the standard GB/T 22238-2008 predetermined Tibetan 5701 24 × 48 dot matrix ldan bold type in Table 1.

Table 1 Tibetan font table (extension set B)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

twenty one

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

twenty two

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

TABLE 1 (cont.)

Appendix A

(Informative)

Tibetan Ganden blackbody Tibetan Ganden specified in this standard () in bold refer Dege woodcut, wood pond that version of "Kanjur" "Tengyur" and other versions Font and production, is one of many different styles in bold in a book unique body shape.

Appendix B

(Normative)

Tibetan 24 × 48 dot matrix font data B.1 Tibetan of 24 × 48 dot matrix font data representing this standard, Tibetan font data may be represented by a dot. Each dot font data is 24 × 48 (dots × transverse column Points), a total of 1152 bits, 144 bytes.

B.2 Tibetan recording format 24 × 48 dot font data Tibetan 24 × 48 dot matrix font data of 144 bytes are arranged in the order of byte 0 to byte 143 ends, are made of hexadecimal System indicates, 3 bytes per line, which is a recording format shown in Table B.1.

Table B.1 24 × 48 dot font data recording format

Rows

Number of columns

0 1,234,567,891,011,121,314 15 1,617,181,920,212,223 0 0 Byte 1 Byte 2 Byte 3 bytes 4 bytes 5 bytes 47141 bytes 142 bytes 143 bytes B.3 Tibetan 24 × 48 dot matrix font data sample

Example Data 24 × 48 dot font Tibetan Table B.2.

Table B.2 exemplary font data dot Tibetan

F00A1 F006C F02E3

000000

000000

001C00

003E00

000000

000000

00F000

03FC00

063F00

0E0F80

0F83E0

000000

000000

000000

000000

000000

000000

000000

Table B.2 (continued)

F00A1 F006C F02E3

003E 00

001C 00

000 000

000 000

07FF F8

07FF F8

07FF F8

021C 38

030C 18

070C 18

1F04 08

0E04 08

00FF F8

00FF F8

01FF F8

0107 C0

009F F0

00B8 78

00FE C0

00FF 80

00FF C0

0001 E0

000F D8

001F C0

0030 C0

003B C0

0013 E0

07C0 78

01F0 78

007C 18

001F F0

0003 E0

0781F0

000000

07FFF8

07FFF8

07FFF8

021C38

030C18

070C18

1F0408

0E0408

03FFE8

03FFE0

03FFF0

007FF8

01FFF8

03FFF8

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

03FFF8

03FFF8

03FFF8

061C38

0C0C18

0C0C18

0FC408

1FFC08

1FFC08

003C08

03FC38

03FC38

03FC38

060C18

0C0C18

0C0408

0E3F88

0F3FE8

073FF8

0200F8

0007F8

0007F0

000FF0

001CF8

0008F8

00000C

000000

000000

000000

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Referenced standards

How to Download GB 29280-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB 29280-2012

$465.00