GB 29279-2012Information technology - Tibetan ideogram coded character set (extension set B). 24x48 dot matrix font - Bkav bstan lean (English PDF)
信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹白体
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for GB 29279-2012 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Mandatory
Issue date
December 31, 2012
Implementation date
December 1, 2013
Scope
GB 29279-2012 is the English-translated version of 信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹白体.
GB 29279-2012 — This standard specifies the GB/T 22238-2008 Tibetan in the graphic character 24 × 48 dot font ldan white body. This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.
Found what you need?
Document preview — GB 29279-2012
National Standard of the People's Republic of China
- ICS
- 35.040
- Classification
- L 71
Issued by: Standardization Administration of China
Contents
- Introduction
- Introduction
- 1 Scope
- 2 Normative References
- Terms and definitions 1
- 4 Is a standard data management
- 5 Dot font representation
- 6 Tibetan bitmap fonts
- Appendix A (informative) Tibetan Ganden White
- Annex B (normative) Tibetan 24 × 48 dot matrix font data
Foreword
All technical contents of this standard is mandatory.
This standard was drafted in accordance with rules GB/T 1.1-2009 given.
This standard is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).
This standard was drafted. Weifang Beida Jade Bird Huaguang typesetting Ltd., China Electronics Standardization Institute, China Tibetology in Heart, Tibet Tibetan Language Work Committee Office.
Drafters of this standard. Yan Jianmin, on behalf of the red, Cong Bo, Xu Zhiqiang, Xiong Tao, Zhou Hua, Chen Zhuang, Lvjian Chun, Bao Gong Dagestan, Wei Ming Zhen, Zhang Yuhong.
Introduction
This standard part Sanskrit and Tibetan "Information technology - Tibetan coded character set - Extension B" as defined in accordance with GB/T 22238-2008 Sound transfer Tibetan character to our Tibetan region-specific font based on the design and provision of information systems with 24 × 48 dot matrix Tibetan Ganden White body (see Appendix A) font.
Authorize the relevant font data transfer using matters font standard data maintenance, updating and revision of the unified responsibility of focal point.
Address. Dongcheng District Andingmen East Avenue (Beijing 1101 mailbox) Postal Code. 100007 Tel. 6,400,768,984,029,173 Fax. 64007681 E-mail. daihong@cesi.ac.cn Information technology - Tibetan coded character set (Set Extended B) 24 × 48 dot font ldan white body
1 Scope
This standard specifies the GB/T 22238-2008 Tibetan in the graphic character 24 × 48 dot font ldan white body.
This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only applies to the version dated paper Pieces. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 22238-2008 Information technology - Tibetan coded character set - Extension B
3 Terms and Definitions
The following terms and definitions apply to this document.
Font glyph
A recognizable abstract graphic symbols, it does not depend on any particular design.
Font font
Glyph image set having the same basic design, such as. Ganden white body.
Bitmap font dotmatrixfont to rendezvous to phenotype graphic character (shape).
Word order characterorder in the graphic character set is arranged in order according to certain rules.
4 Standard data management
To strengthen the management of electronic information technology products Tibetan font standard data, to ensure the correctness of the implementation of this standard in data and Consistency to authorize the use of font data transfer issues, to maintain the standard font data, updating and revision, unified by a centralized unit be responsible for.
5 Dot font representation
5.1 Grid
Raster is formed by the vertical and horizontal lines intersecting equidistant from several pieces.
Specified in this standard is 24 × 48 dot matrix font, which is transverse grid 24 grid, 48 longitudinal grid. The center of each grid point in a given Heart position.
Only the grid points constituting each lattice positioning grid shown in Figure 1.
FIG matrix 1 24 × 48 grid of FIG.
5.2 Points
Point is the minimum unit of dot font, which is located within each square black areas.
5.3 Dot matrix typeface
Tibetan word bitmap fonts from several points located within the set of grid FIG. Tibetan "" The 24 × 48 dot matrix font as 2 shown in FIG.
FIG 2 24 × 48 dot matrix Tibetan "" font
6 Tibetan bitmap fonts
6.1 The number of characters this standard provides a 24 × 48 dot font ldan autologous GB/T 22238-2008 predetermined Tibetan 5701 graphic characters.
6.2 Word order
24 × 48 dot-shaped body of the present ldan white standard provided Tibetan 5701 graphic characters in accordance with GB/T 22238-2008 predetermined Character alignment word order.
6.3 Tibetan font data
Tibetan 24 × 48 dot font data representation, Appendix B.
Tibetan bitmap font table 6.4 this provides the standard GB/T 22238-2008 predetermined Tibetan 5701 24 × 48 dot font ldan autologous Table 1.
Table 1 Tibetan font table (extension set B)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
twenty one
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
twenty two
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
TABLE 1 (cont.)
Appendix A
(Informative)
Tibetan Ganden white body Tibetan Ganden specified in this standard () white body with reference to Dege woodcut, wood pond that version of "Kanjur" "Tengyur" and other versions Font creation, is one of many different styles of white body in a unique typeface font.
Appendix B
(Normative)
Tibetan 24 × 48 dot matrix font data B.1 Tibetan of 24 × 48 dot matrix font data representing this standard, Tibetan font data may be represented by a dot. Each dot font data is 24 × 48 (dots × transverse column Points), a total of 1152 bits, 144 bytes.
B.2 Tibetan recording format 24 × 48 dot font data Tibetan 24 × 48 dot matrix font data of 144 bytes are arranged in the order of byte 0 to byte 143 ends, are made of hexadecimal System indicates, 3 bytes per line, which is a recording format shown in Table B.1.
Table B.1 24 × 48 dot font data recording format
Rows
Number of columns
0 1,234,567,891,011,121,314 15 1,617,181,920,212,223 0 0 Byte 1 Byte 2 Byte 3 bytes 4 bytes 5 bytes 47141 bytes 142 bytes 143 bytes B.3 Tibetan 24 × 48 dot matrix font data sample
Example Data 24 × 48 dot font Tibetan Table B.2.
Table B.2 exemplary font data dot Tibetan
F00A1 F006C F02E3
000000
000000
000000
003C00
000000
03E000
0FF800
0C1E00
000000
000000
000000
000000
000000
000000
000000
Table B.2 (continued)
F00A1 F006C F02E3
003C00
000000
000000
0FFFFC
1FFFF8
021C38
060C18
0E0C18
1C0408
03FFF8
07FFF0
019F00
00BFC0
00E0C0
00C060
0000C0
01F080
03FD00
060F00
0001C0
001FC8
003F80
0060C0
2060C0
0300F8
00C088
000FF0
0003E0
0F 8020
00 0000
1F FFFC
3F FFF8
02 1C38
06 0C18
0E 0C18
1C 0408
03 FFF8
07 FFF0
00 01C0
00 00C0
00 0FD0
00 3FF8
00 C008
00 0000
00 0000
000000
000000
000000
000000
0FFFFC
1FFFF8
031C38
060C18
0C0C18
3F0408
3FC408
00F408
001C08
03FC1C
07F838
0C1818
0C0C18
180C08
187C08
1CFF08
0C0388
0800C8
0007F8
000FF0
0030F0
0019F8
00100C
000000
000000
000000
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
Referenced standards
How to Download GB 29279-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22238-2008 — Information technology - Tibetan coded character set - Extension B
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
Secure payment via Stripe
Payments accepted
GB 29279-2012
$465.00