Valid

GB 29276-2012Information technology - Tibetan ideogram coded character set (basic set and extension set A). 24x48 dot matrix font - Bkav bstan bold (English PDF)

信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 甘丹黑体

Preview PDF

This is a limited preview

Buy now to download the full PDF (12 pages)

Need quotation for your management?

Get a formal quotation for GB 29276-2012 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Mandatory

Issue date

December 31, 2012

Implementation date

December 1, 2013

Scope

GB 29276-2012 is the English-translated version of 信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 甘丹黑体.

GB 29276-2012 — This standard specifies a 24 × 48 dot matrix GB 16959-1997 and GB/T 20542-2006 Tibetan graphic characters in bold ldan Font. This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.

Found what you need?

Document preview — GB 29276-2012

National Standard of the People's Republic of China

ICS
35.040
Classification
L 71

Issued by: Standardization Administration of China

Contents

  • Introduction
  • Introduction
  • 1 Scope
  • 2 Normative References
  • Terms and definitions 1
  • 4 Is a standard data management
  • The method represents bitmap fonts
  • 6 Tibetan bitmap font
  • Appendix A (informative) Tibetan Ganden blackbody
  • Annex B (normative) Tibetan 24 × 48 dot matrix font data

Foreword

All technical contents of this standard is mandatory.

This standard was drafted in accordance with rules GB/T 1.1-2009 given.

This standard is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).

Drafted by. China Electronics Standardization Institute, Ltd. Weifang Beida Jade Bird Huaguang typesetting, China Tibetan Studies Heart, Tibet Tibetan Language Work Committee Office.

Drafters of this standard. Daihong, Xu Zhiqiang, Cong Bo, Xiong Tao, Yan Jianmin, Zhou Hua, Chen Zhuang, Lvjian Chun, Bao Gong Dagestan, Deng Lili Zhao Rui, Du Xiaohong.

Introduction

According to this standard GB 16959-1997 "Technical information exchange with Tibetan coded character set basic set" and GB/T 20542-Under the 2006 "Information technology - Tibetan coded character set - Extension A" and some Tibetan Sanskrit transliteration Tibetan character, Tibetan land to our country Standard font area, based on a predetermined design and information systems (see Appendix A) shaped in Tibetan 24 × 48 dot matrix ldan bold.

Authorize the relevant font data transfer using matters font standard data maintenance, updating and revision of the unified responsibility of focal point.

Address. Dongcheng District Andingmen East Avenue (Beijing 1101 mailbox) Postal Code. 100007 Tel. 6,400,768,984,029,173 Fax. 64007681 E-mail. daihong@cesi.ac.cn Information technology - Tibetan coded character set (Basic sets and expansion sets A) 24 × 48 dot font bold ldan

1 Scope

This standard specifies a 24 × 48 dot matrix GB 16959-1997 and GB/T 20542-2006 Tibetan graphic characters in bold ldan Font.

This standard is primarily applicable to the display device Tibetan information processing system, an output dot matrix device can also be used for other related equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only applies to the version dated paper Pieces. For undated references, the latest edition (including any amendments) applies to this document.

GB 16959-1997 Technical information exchange with a basic set of coded character set Tibetan GB/T 20542-2006 Information technology - Tibetan coded character set - Extension A

3 Terms and Definitions

The following terms and definitions apply to this document.

Font glyph

A recognizable abstract graphic symbols, it does not depend on any particular design.

Font font

It has shaped the image of the same basic design of the collection, such as. Ganden bold.

Bitmap font dotmatrixfont to rendezvous to phenotype graphic character (shape).

Word order characterorder in the graphic character set is arranged in order according to certain rules.

4 Standard data management

To strengthen the management of electronic information technology products Tibetan font standard data, to ensure the correctness of the implementation of this standard in data and Consistency to authorize the use of font data transfer issues, to maintain the standard font data, updating and revision, unified by a centralized unit be responsible for.

5 Dot font representation

5.1 Grid

Raster is formed by the vertical and horizontal lines intersecting equidistant from several pieces.

Specified in this standard is 24 × 48 dot matrix font, which is transverse grid 24 grid, 48 longitudinal grid. The center of each grid point in a given Heart position.

Only the grid points constituting each lattice positioning grid shown in Figure 1.

FIG matrix 1 24 × 48 grid of FIG.

5.2 Points

Point is the minimum unit of dot font, which is located within each square black areas.

5.3 Dot matrix typeface

Tibetan word bitmap fonts from several points located within the set of grid FIG. Tibetan "" The 24 × 48 dot matrix font as 2 shown in FIG.

FIG 2 24 × 48 dot matrix Tibetan "" font

6 Tibetan bitmap fonts

6.1 The number of characters this standard provides a 24 × 48 dot GB 16959-1997 and GB/T 20542-2006 predetermined character pattern 1729 Tibetan Array Gaden boldface type, including in GB 16959-1997 193 th and GB/T 20542-2006 in 1536.

6.2 Word order

This standard provides 1729 Tibetan pattern of 24 × 48 dot matrix characters ldan bold type and according to GB 16959-1997 Character word sequences aligned GB/T 20542-2006 predetermined.

6.3 Tibetan font data

Tibetan 24 × 48 dot font data representation, Appendix B.

Tibetan bitmap font table 6.4 this standard provides 1729 Tibetan pattern of 24 × 48 dot matrix characters ldan bold type in Table 1 and Table 2.

Table 1 Tibetan font table (basic set)

Table 2 Tibetan font table (extension set A)

TABLE 2 (cont.)

TABLE 2 (cont.)

TABLE 2 (cont.)

TABLE 2 (cont.)

TABLE 2 (cont.)

Appendix A

(Informative)

Tibetan Ganden blackbody Tibetan Ganden specified in this standard () in bold refer Dege woodcut, wood pond that version of "Kanjur" "Tengyur" and other versions Font creation, is one of many different styles in bold in a book unique body shape.

Appendix B

(Normative)

Tibetan 24 × 48 dot matrix font data B.1 Tibetan of 24 × 48 dot matrix font data representing this standard, Tibetan font data may be represented by a dot. Each dot font data is 24 × 48 (dots × transverse column Points), a total of 1152 bits, 144 bytes.

B.2 Tibetan recording format 24 × 48 dot font data Tibetan 24 × 48 dot matrix font data of 144 bytes are arranged in the order of byte 0 to byte 143 ends, are made of hexadecimal System indicates, 3 bytes per line, which is a recording format shown in Table B.1.

Table B.1 24 × 48 dot font data recording format

Rows

Number of columns

0 1,234,567,891,011,121,314 15 1,617,181,920,212,223 0 0 Byte 1 Byte 2 Byte 3 bytes 4 bytes 5 bytes 47141 bytes 142 bytes 143 bytes B.3 Tibetan 24 × 48 dot matrix font data sample

Example Data 24 × 48 dot font Tibetan Table B.2.

Table B.2 exemplary font data dot Tibetan

0F55

F337 F432

000000

000000

000000

000000

000000

000000

000000

000000

000000

00F000

03FC00

063F00

0E0F80

0F83E0

000000

000000

000000

000000

000000

000000

000000

twenty one

Table B.2 (continued)

0F55

F337 F432

000000

000000

000000

000000

07FC78

07FC78

07FC78

0C00F8

0C0C08

1FF808

1FFF08

1FFFC8

0007E8

0000F8

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

0781F0

000000

0FFE38

0FFE38

0FFE38

041C18

0C3E18

080F88

1F03C8

1FC0E8

1FE078

07FFF8

07FFF8

07FFF8

021C38

030C18

070C18

0F0408

01F064

07FFC4

0E0F08

0F0018

07C070

01FFF0

007FE0

000F80

000000

000000

000000

000000

000000

000000

000000

000000

000000

000000

07FC38

07FC38

07FC38

0C0C18

180C18

1C3F88

1E3FE8

0E3FF8

00FFF8

00FFF8

01FFF8

0087C0

009FF0

00B878

0E0060

0F00F0

07C0F8

03E078

00F818

007E30

001FE0

0007C0

000000

000000

000000

000000

000000

000000

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.

Referenced standards

How to Download GB 29276-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
12 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB 29276-2012

$255.00