GB 28481-2012Limit of harmful substances of plastic furniture (English PDF)

3.1 Plastic furniture

Furniture made entirely of plastic materials, or furniture made of frames or components

mainly composed of plastic sheets, pipes, profiles, etc.

3.2 Phthalates

Carry out according to the method specified in Appendix C of GB 6675-2003.

5.4 Determination of the total of benzo[alpha]pyrene and polycyclic aromatic

hydrocarbons (PAH)

Carry out according to method 1 specified in SN/T 1877.2-2007.

5.5 Determination of polybrominated biphenyls

Carry out according to the method specified in SN/T 2005.2-2005.

5.6 Determination of polybrominated diphenyl ether

Carry out according to the method specified in SN/T 2005.2-2005.

6.1 Inspection items

All technical contents listed in this Standard are type inspection items.

6.1.1 Under normal production conditions, type inspection shall be carried out at least

once a year.

6.1.2 Type inspection shall be carried out in any of the following cases:

-- when a new product is initially finalized;

-- when the product is produced off-site;

-- when there are major changes in product formula, production process and raw

materials;

-- when production is resumed after a suspension of three months and above.

-- when it is requested by the client;

-- when the national quality and technical supervision agency proposes type

inspection requirements.

6.2 Determination of the test result

6.2.1 When the results of all inspection items meet the requirements of this Standard,

the product is determined to be qualified; if any of the inspection results does not meet

the requirements of this Standard, the product is determined to be unqualified.

6.2.2 Where the furniture contains different plastic materials, if all materials meet the

requirements of this Standard, the product is judged to be qualified; if any one of the

......