GB 28245-2012Automatic metalforming machinery - Noise limits (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document supersedes GB/T 28245-2012 "Noise Limits for Automatic Forging Presses". This document is consistent with GB/T 28245-2012.

Aside from structural adjustments and editorial modifications, the main technical changes are as follows.

---The noise limits for thread rolling machines have been changed (see 4.1, 3.1 in the 2023 version);

---The noise limits for spring coiling machines have been changed (see 4.2, 3.2 in the 2023 version);

---The noise limits for nail making machines have been changed (see 4.3, 3.3 in the 2023 version);

---Noise limits have been added for products such as automatic bolt upsetting machines, automatic nut upsetting machines, and multi-station parts forming machines. The noise limits have been modified.

Noise limits for automatic upsetting forging machines (see 4.4, 3.4 in the 2023 edition);

---The noise limits for automatic edge trimming machines have been changed (see 4.5, 3.5 in the 2023 version);

---The noise limits for automatic yarn rolling machines have been changed (see 4.6, 3.6 in the 2023 version);

---The noise limits for automatic bending machines have been changed (see 4.7, 3.7 in the 2023 edition).

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the China Machinery Industry Federation.

This document is under the jurisdiction of the National Technical Committee on Standardization of Forging and Pressing Machinery (SAC/TC220).

1 Scope

This document specifies the noise limits and measurement methods for automatic forging presses.

This document applies to all types of automatic forging presses, including various types of thread rolling machines, spring coiling machines, nail making machines, automatic upsetting machines, and automatic...

Edge trimming machine, automatic wire rolling machine, automatic bending machine.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 23281 Measurement Method for Sound Pressure Level of Forging Machinery GB/T 23282 Measurement Method for Sound Power Level of Forging Machinery Noise GB/T 36484 Terminology for Forging Machinery

3 Terms and Definitions

The terms and definitions defined in GB/T 36484 apply to this document.

4 Noise Limits