Valid

GB 25908-2010Information technology - Uyghur, Kazak, Kirgiz coded character set. 16��32 dot matrix font - Tuz lean (English PDF)

信息技术维吾尔文、哈萨克文、柯尔克孜文编码字符集 16×32点阵字型正文白体

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for GB 25908-2010 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Mandatory

Issue date

January 10, 2011

Implementation date

November 1, 2011

Scope

GB 25908-2010 is the English-translated version of 信息技术维吾尔文、哈萨克文、柯尔克孜文编码字符集 16×32点阵字型正文白体.

GB 25908-2010 — This standard specifies the GB 21669-2008 in Uygur, Kazak, Kirgiz character 16 × 32 dot matrix text white body font. This standard applies to the Uygur, Kazak, Kirgiz information systems, but also for other related equipment.

Found what you need?

Document preview — GB 25908-2010

National Standard of the People's Republic of China

ICS: 35.040
Classification: L 71

Issued by: Standardization Administration of China

Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Graphic character
2 5 standard data management

Foreword

All the technical contents of this standard is mandatory.

This standard is based on GB 21669-2008 "IT Uygur, Kazak, Kirgiz coded character set" under Uygur, Kazak, Kirgiz nominal character, appeared deformed characters and common symbols, with our current standard Uighur, Kazakh Sack paper, Kirghiz text form the basis and in accordance with existing norms Uygur, Kazak, Kirgiz orthographic principles, design and provides information systems Uygur, Kazak, Kirgiz 16 × 32 dot matrix text white body (see Appendix A) fonts.

The Standard Annexes A and B are informative annex, Annex C is normative appendix.

This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.

This standard was drafted. China Electronics Standardization Institute, Xinjiang Uygur Autonomous Region National Language Commission, Weifang Beida Jade Bird Huaguang Phototypesetting Ltd., Xinjiang Uygur Autonomous Region Information Industry Department.

Drafters of this standard. on behalf of the red, according to Adams Mystic · Buy mention XIONG Tao, Qing Tong added · Cardiff, Lvjian Chun, Arsene Imin, Xu Zhiqiang, high gorge, Gaugamela · Shamil, Wang Li.

Introduction

Authorization to use the relevant font data transfer matters, to maintain the standard font data, updating and revision of unity is responsible for the centralized units.

Address. Andingmen East Street, Dongcheng District No. 1 (Beijing 1101 mailbox) Zip Code. 100007 Tel. 6,400,768,984,029,173 Fax. 64007681 E-mail. daihong@cesi.ac.cn IT Uighur, Kazakh, Kirgiz coded character set 16 × 32 dot matrix font text white body

1 Scope

This standard specifies the GB 21669-2008 in Uygur, Kazak, Kirgiz character 16 × 32 dot matrix text white body font.

This standard applies to the Uygur, Kazak, Kirgiz information systems, but also for other related equipment.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 21669-2008 IT Uygur, Kazak, Kirgiz coded character set GB 13000 Information technology - Universal Multiple-Octet Coded Character Set (UCS) (GB 13000-2010, ISO/IEC 10646:2003, IDT)

3 Terms and Definitions

The following terms and definitions apply to this standard.

Font glyph

One kind of recognizable abstract graphic symbol, it does not depend on any particular design.

Font font

Glyph image set having the same basic design, such as. text white body.

Bitmap fonts dotmatrixfont in a collection of dots to show the graphic character type (shape).

Font width the effective width of the dot graphic characters.

Word order characterorder Graphic character in the set are arranged according to certain rules of order.

4 Graphic character

4.1 The number of characters this standard is based on GB 21669-2008 provisions provided Uygur, Kazak, Kirgiz 190 graphic characters, in which.

Uygur, Kazak, Kirgiz behalf of 42 characters;

Uygur, Kazak, Kirgiz deformed characters appear 143;

Uygur, Kazak, Kirgiz share numbers, punctuation marks, special symbols 5.

4.2 A character sequence this standard provides 190 Uygur, Kazak, Kirgiz nominal character, appeared deformed characters and common symbols font They are arranged in the order specified in GB 13000.

5 Standard data management

In order to strengthen the exchange of information with the product with Uighur, Kazakh, Kirghiz management font and text-based data standards, to ensure that this Standards in the implementation of data consistency and correctness to authorize the use of font data transfer matters, to maintain the standard font data, Updating and revision of the responsibility of the unified centralized units.

The method represents bitmap fonts

6.1 Grid

Equidistant grid by a number of vertical and horizontal lines intersect to form.

This standard specifies that the 16 × 32 dot matrix font, which is a horizontal grid 16 grid, 32 longitudinal grid. The center of each square is set at the center position of the point.

Raster Only constituting each lattice point to locate, 16 × 32 dot matrix grid shown in Figure 1.

Figure 1 16 × 32 dot raster

6.2 Points

Point is the smallest unit constituting the lattice-shaped, circular indicated that it is located within the black areas of the parties to the grid.

6.3 Lattice words

Words Uygur, Kazak, Kirgiz graphic character bitmap fonts from a number of points placed within the grid to set the table Shown. Uygur, Kazak, Kirgiz, "" the words of 16 × 32 dot matrix shown in Figure 2.

Figure words 2 16 × 32 dot matrix letters for ""

6.4 Font width information

Uygur, Kazak, Kirgiz is unequal width font, each character has its own specific width, the width of the font width Information table to represent, see Appendix B.

7 Bitmap fonts

7.1 Font data

Uygur, Kazak, Kirgiz 16 × 32 dot matrix font data representation, see Appendix C.

Table 7.2 bitmap fonts

GB 21669-2008 in the 190 Uighur This standard provides, Kazakh, Kirgiz graphic character 16 × 32 dot matrix White body text fonts are shown in Table 1.

Table 1 Uygur, Kazak, Kirgiz Text table

Appendix A

(Informative)

White body text

White body text means straight correct font. Uygur, Kazak, Kirgiz belongs to the type of alphabetic writing, from right line section to the left, all the characters showed their different widths. White body is the body of long-term use Arabic text-based process, after repeated repair Complete change after the formation of a unique style. Body white body as the center dash, clean, beautiful, bold strokes, vigorous, moderate length, vertical painting roughness of 2/3 crude pen, in a straight shape, gives a serious, steady feeling.

White body is the body of Uygur, Kazak, Kirgiz standard fonts, high practical value, using a wide range, mainly for newspapers Printed books, the handwriting is the first choice and calligraphy plaque with the word.

Appendix B

(Informative)

Font width information table Uygur, Kazak, Kirgiz is unequal width font, each character has its own specific width, font width information table it defines the effective width of the standard 190-character dot pattern, see Table B.1.

Table B.1 font width information table

Wide code word code word code word wide wide wide code word code word code word wide width 060C 3 0678 14 FBAD 9 FBF2 11 FEA5 11 FED7 7 061B 3 067E 12 FBD3 12 FBF3 13 FEA6 12 FED8 8 061F 7 0686 11 FBD4 16 FBF4 11 FEA7 11 FED9 12 0626 11 0698 7 FBD5 11 FBF5 13 FEA8 13 FEDA 16 0627 2 06AD 12 FBD6 12 FBF6 14 FEA9 8 FEDB 9 0628 12 06AF 15 FBD7 7 FBF7 16 FEAA 13 FEDC 11 062A 12 06BE 11 FBD8 9 FBF8 9 FEAD 5 FEDD 8 062C 11 06C5 7 FBD9 7 FBF9 14 FEAE 8 FEDE 12 062D 11 06C6 7 FBDA 9 FBFA 16 FEAF 5 FEDF 4 062E 11 06C7 7 FBDB 7 FBFB 9 FEB0 8 FEE0 8 062F 8 06C8 7 FBDC 9 FE89 11 FEB1 16 FEE1 9 0631 5 06C9 7 FBDD 7 FE8A 11 FEB2 16 FEE2 10 0632 5 06CB 7 FBDE 7 FE8B 6 FEB3 13 FEE3 9 0633 16 06D0 11 FBDF 9 FE8C 7 FEB4 11 FEE4 9 0634 16 06D5 7 FBE0 7 FE8D 2 FEB5 16 FEE5 11 0639 11 FB56 12 FBE1 9 FE8E 6 FEB6 16 FEE6 13 063A 11 FB57 15 FBE2 7 FE8F 12 FEB7 13 FEE7 6 0640 6 FB58 7 FBE3 9 FE90 15 FEB8 11 FEE8 7 0641 12 FB59 7 FBE4 11 FE91 6 FEC9 11 FEE9 7 0642 12 FB7A 11 FBE5 11 FE92 7 FECA 11 FEEA 9 0643 12 FB7B 12 FBE6 6 FE95 12 FECB 8 FEED 7 0644 8 FB7C 11 FBE7 7 FE96 15 FECC 10 FEEE 9 0645 9 FB7D 12 FBE8 6 FE97 7 FECD 11 FEEF 11 0646 11 FB8A 7 FBE9 7 FE98 7 FECE 11 FEF0 11 0648 7 FB8B 8 FBEA 9 FE9D 11 FECF 8 FEF1 11 0649 11 FB92 15 FBEB 12 FE9E 12 FED0 10 FEF2 11 064A 11 FB93 15 FBEC 13 FE9F 11 FED1 12 FEF3 6 066A 10 FB94 10 FBED 14 FEA0 13 FED2 14 FEF4 7 0674 3 FB95 10 FBEE 11 FEA1 11 FED3 7 FEFB 8 0675 6 FBAA 11 FBEF 13 FEA2 12 FED4 8 FEFC 11 0676 7 FBAB 9 FBF0 11 FEA3 11 FED5 12 0677 7 FBAC 11 FBF1 13 FEA4 13 FED6 14 Appendix C (Normative) 16 × 32 dot matrix font data Represents C.1 16 × 32 dot matrix font data this standard, the graphic character font data is represented by a dot. Each dot font data is 16 × 32 (dots × vertical transverse Column points), a total of 512 bits, 64 bytes.

Recording format C.2 16 × 32 dot matrix font data 64 bytes 16 × 32 dot matrix font data and order of a 0 byte to 63-byte end, are expressed in hexadecimal, Two bytes per row, the recording format is as follows.

Rows

Number of columns

0 1,234,567,891,011,121,314 15

00 Byte 1 Byte

3162 bytes 63 bytes

C.3 16 × 32 dot matrix font data, for example

0626 FEB6 FEDA FEFC

0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,100,100 0,000,000,000,300,300 0,000,002,000,300,300 0,000,007,000,308,300 0180 0020 0010 C300 0200 0088 0710 E300 0180 01DC 0C10 7100 0,200,008,806,103,100 0,000,000,003,101,900 00C0 0000 4E10 1900 01E0 0000 8010 0B00 0300 0024 8010 0B00 0200 0124 C038 0F00 4380 43FF 7FEF 0DE0 81C0 81DB 3FC7 0CE0 8,040,810,000,001,800 C0C0 8100 0000 3800 7F80 C300 0000 E000 3F00 7E00 0000 0000 0000 3C00 0000 0000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000 0,000,000,000,000,000

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

Normative references

ISO/IEC 10646

How to Download GB 25908-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.